This is a kind of fine quality level instrument, 4D 16 lines for finer positioning, with self-leveling system, flexibility and stability. With vertical and horizontal laser lines, convenience to use. Comes with one extension bar, which is made of thicken aluminum alloy material, 3-heights adjustable, suitable to most of laser level with 5/8" interface. It is perfect for a variety of uses, including flooring, tile layout, paneling, wallpapering, stenciling, wainscoting, finish carpentry,?wall stud layout and partition installation. You can have a try.
Features:
4D 16 lines for finer positioning, with self-leveling system, flexibility and stability.
Adopts optical glass, fine transmission, with clear laser light.
Push button design, push left to open it, push right to close it.
Equipped with self-test calibration function, less than 3 degrees automatic leveling, but if the angle is over 3 degrees , the laser light will keep blinking and also has beep sound to reminding you to reset them on a flat ground.
Equipped with LCD display, with battery remaining electricity display function for you to recharge the battery in time.
The magnetic-damping compensation system ensures quick leveling time.
Three touching buttons design, one OUTDOOR/Open button, one V button, and one H button, the slashline, horizontal line and vertical line with a clear division.
1/4inch thread size on the bottom for easy connection, it can be used with tripod to adjust the working height of the machine.
The T-shape bracket has 360 degrees rotatable base, and equipped with spirit-bubble, can make the machine quickly find the target(
1/4inch screw size).
With 7mm wall mounted distance, general for indoor and outdoor use.
Equipped with window clip holder for works with wall-mounted bracket.
Comes with one remote control, A=vertical line, B=horizontal line.
The remote controller also has laser light brightness adjustable function, long press A to light up and long press B to dim it.
The button is wear resistant, with high sensitive to switch the line mode quickly, and with comfortable hand feeling.
1/4inch to 5/8inch thread adapter for easy connection, it can be used with 5/8inch thread tripod to adjust the working height of the machine.
Easy to carry with the carrying bag, providing quick and convenient mobility and storage.
Extension Bar:
Made of thicken aluminum alloy material, firm with fine load-bearing, not easy to deformed and not easy to break.
Three heights adjustable, you can adjust according to your demands easily.
Equipped with bubble-level to help you to check whether the tripod is horizontal or not.
Equipped with rocking bar to adjust to height of the tripod, smooth and effort saving.
With fixed plectrum to control to extend length to lock it tightly.
Comes with one storage bag, easy to storage and convenient to carry around with you.
Suitable to most of laser level with 5/8inch interface.
Note:
The laser output maker is located on the output hole.
Do not stare directly at the laser light.
Do not disassemble the instrument and perform internal repairs by yourself.
This instrument meets the laser radiation safety rating standard.
Specifications:
Name: Laser Level Set
Main material: plastics metal
Color: black+green
Battery: 2 * rechargeable battery, 3.7V, 1500mAh (
included, you will find there are two 18650 batteries inside if disassemble one)
Laser ray: 360 degrees *4, 16lines(
40)
Display: LCD display
Wavelength: Green light 532nm
Laser lines accuracy: +/-0.2mm/10m
Self-levelling-range: +/-3 degrees
Alarm angle: 3 degrees
Waterproof grade: IP54
Working-range: about 25m in diameter
Working time: about 5 hours
Green light working temperature: -5 celsius to? 50 celsius
Extension bar interface: 5/8inch
Battery size: 73 * 52 * 30mm / 2.87 * 2.05 * 1.18in
Level machine: 127 * 103 * 135mm / 5.00 * 4.06 * 5.31in
Assemble size: 129 * 103 * 135mm / 5.08 * 4.06 * 5.31in
Wall-mounted bracket size: 145 * 124 * 35mm / 5.71 * 4.88 * 1.38in
Iron-board: 100 * 60 * 12mm / 3.94 * 2.36 * 1.47in
1/4" to 5/8" adapter size: 23 * 23 * 30mm / 0.91 * 0.91 * 1.18in
Lifting platform size: 115 * 91 * 30mm / 4.53 * 3.58 * 1.18in
Clip holder: 25 * 22 * 62mm / 0.98 * 0.87 * 2.44in
Carrying bag: 235 * 215 * 165mm / 9.25 * 8.46 * 6.50in
Extension size: 450 * 303 * 260mm / 17.72 * 11.93 * 10.24in
Item weight: 1715g / 3.78lb
Package size: 440 * 215 * 255mm / 17.32 * 8.46 * 10.04in
Package weight: 1979g / 4.36lb
Packing List:
1 * Level Machine
2 * Battery
1 * Lifting Platform
1 * Mini Remote Controller
1 * Wall Mounted Bracket
1 * Clip Holder
1 * Iron Board
1 * 1/4" to 5/8" Adapter
1 * Power Cable
1 * Carrying Bag
1 * Manual
1 * Extension Bar
No-delivery refund
