Feature:
Automotive sheet metal dent repair puller Sheet metal dent repair T handle hail pit repair puller +18 gaskets
Specifications:
Material: Aluminum alloy
Product size :120mm x 11mm
Color: as shown
Model: M10
Specifications: T-type puller + 18Pcs blue gasket
Product Description:
1. Made of aluminum alloy, exquisite technology. Strong and durable.
2. It is a necessary part for repairing the depression, and can directly replace the defective parts.
3. Easy to use, easy to carry, very convenient and durable.
Note: this product does not come with glue gun and glue stick, if necessary, need to buy another.
Usage:
1. Clean the dent with a clean, damp cloth.
2. Put the glue stick into the glue gun, pull the trigger to let the glue stick into the glue gun, turn on the power supply and preheat for 5 minutes.
3. Use a suitable brushed gasket. Large dents require a large stretch gasket. Note: The larger the drawing pad, the greater the tension
4. Pull the trigger and apply the extrusion glue to the drawing pad 4 holes of the gasket should be coated with hot melt glue.
5. Quickly place the wire drawing pad in the center of the dent with hot melt adhesive pad, gently press until the glue solidifies and sticks let the glue cool for about 8 minutes, slightly shorter in winter.
6. Align the T-shaped restorer, press the wire-drawing gasket with hot melt glue, and pull the slide rod back until the dent is pulled up.
7. After the repair is completed, the gasket can be removed with a scraper. It is easier to remove when wet with water.
8. Finally, clean the repaired area with a clean, damp cloth.
Products include:
T type puller *1
Gasket * 18
