Great news: from now on, after buying it, watching TV will no longer have to spend money every month! !
Description:
Features:
- Adopting high gain 25dBi antenna to boost signals for HDTV.
- Made of high-quality metal, signal transmission is faster and more stable.
- 360 degree no dead angle receiving signal.
- About 5m coaxial cable with F and TV male connector.
- Rubber foot for paintwork protection.
- High frequency of VHF(172-240Mhz)/ UHF(470-860Mhz) with high sensitivity plus high gain 25dBi ensure the stability and smoothness of signal transmission. Give you a great watching TV enjoyment.
- This antenna receives multiple kinds of signals, including ATSC, DVB-T, DVB-T2, ISDB. It is compatible with 720P, 1080i, 1080P/ ATSC.
- This antenna widens the signal receiving range to 200 miles, allows you to get more signals, and more HD TV programs.
- This magnetic base TV signal amplifier antenna supports plug and play. No need for drive or software.
How to Use:
Step 1: connect the end(f-male) of attached coaxial cable to the ANT/IN connector on the back of the TV or DVB-T tuner.
Step 2: In the TV's setup menu, set the tuner mode to "Antenna" or "Air". for more detailed instructions, please refer to your TV manual.
Step 3: In the Tv's setup menu, set TV to "scan" for channels. this can sometimes be listed as auto-program, auto-scan, channel search or channel scan. consult the TV manual for detailed instructions.
Step 4: if reception is sporadic, try moving the antenna to another location and rescanning the TV until optimal position is found.
Step 5: fix the antenna at the optimal position you found.
Specification:
Type：Type: DVB-T/DMB-T/CMMB Antenna
Material: PP
Working frequency: VHF(172-240 MHz)/UHF(470-860 MHz)
VSWR：≤1.5
Rated power：50W
Input Impedance: 50Ω
Output Impedance: 75Ω
LNA high gain: 22dBi
Signal range: 200 miles
Receiving signal: ATSC, DVB-T, DMB-T, CMMB
Compatibility: 720P, 1080i, 1080P
Cable length: approx. 5 meters
Connector Type：IEC.F or other
Voltage: 3-5V
Dimensions: 2.44x5.12 inches (62x130mm)
Package Included:
1 * Digital antenna
1 * IEC
Note: Very important;
We have received feedback from buyers and checked the comments area, saying that the TV antenna has no signal and no channels. This may be your operation error. Please refer to the following operation and try it before evaluating. Thank you very much!
1; The length of the antenna is 5M. Placing the antenna higher or closer to/inside the window may get better reception. At the same time, avoid contact with walls or metal objects. You must rescan every time you move the antenna. Adjust the antenna position; try changing the direction and position of the antenna to find the best signal reception position.
2; Check the antenna connection; make sure the antenna is properly connected to the antenna interface of the TV and the connection is secure. If you find that the connection is loose or damaged, try to replug the antenna.
3; Restart the device; turn off the TV and any devices such as set-top boxes that may be connected, wait a few minutes and then turn it back on. This allows the device to reinitialize and solve some temporary faults.
4; If you are using a flat-screen HDTV, read the TV manual carefully to make sure the TV has a built-in Freeview tuner.
5; You need to re-tune the Freeview TV and digital receiver from time to time to ensure that all available services are retained. Re-tune only takes a few minutes and can be done with the remote control.
6; TV reception depends on the distance between your home, the transmission tower and the surrounding environment.
7; Reception strength and quality always depend on environmental factors, so, like any other antenna, it cannot be guaranteed to receive a signal under all conditions. The TV antenna needs to be connected to a TV box to use.
No-delivery refund
