Current Type Pressure Transmitter 4‑20mA Output G1/4in Pressure Transducer Sender for Oil Fuel Air W

Feature: 1. Sensor Specification: Current type pressure transmitter with standard G1/4 thread, 4‑20mA output signal, 0‑3Mpa pressure, and 10‑30V power supply voltage. 2. Applicable Range: This pressure transmitter can be used to detect oil, fuel, gas, water, or air pressure, and is widely used in oil tanks, gas tanks, and fuel tanks. 3. Stainless Steel and Ceramic: The pressure sensor is made of excellent stainless steel, with ceramic pressure chip, has good corrosion resistance and oxidation resistance. 4. Good Performance: The pressure transmitter sender has a small output error of ±2%FS, a full temperature range, as well as high sensitivity and high accuracy. 5. Surge Voltage Protection: The stainless steel pressure sensor has complete surge voltage protection function, ensuring safe operation and stable performance. Specification: Item Type: Pressure Transducer Sender Thread: G1/4 Response Time: <2ms Accuracy: Within 2% of the Reading (full scale) Rated Pressure Range: 0-3Mpa Burst Pressure: 3 Times Rated Pressure Overload Pressure: 2 Times Rated Pressure Operating Temperature: -40-125℃ Package List: 1 x Pressure Transmitter Note: 1. Choose a place that is easy to operate and maintain for installation. 2. It is recommended to install it far away from sources of vibration. 3. It should be installed far away from heat sources if possible. 4. It is preferable to connect it to the measurement pipeline through a valve. 5. Use a wrench to tighten it at the hex of the transmitter during installation.