Product Description:
brand new high quality
Made of high quality material,
This section supersedes obsolete sections 14-46-2012 22-22-1640.
Brushes that are constantly worn out are the cause of poor motor . A motor that runs intermittently can be repaired by replacing the brushes. New brushes can restore electric braking to the motor. Carbon brushes are of the most frequently replaced power tool parts. This is because carbon brushes are consumable parts that gradually wear out through friction use until they need to be replaced. Worn brushes are a common cause of intermittent motor function, weakened electric braking, reduced motor power. Worn brushes usually wear close to the wires may crack, dent, or burn. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage that could indicate a larger motor problem.
This assembly holds the carbon brushes around the armature to provide a stable contact. This kit includes: plastic retaining ring, four (4) metal brush holders with springs, four (4) carbon brushes with attached wires.
Compatible with these models:
For
2601-20 (B28B) 1/2" Compact Driver Drill
2601-20 (B28C) 1/2" Compact Driver Drill
2650-20 (B55B) 18 Volt 1/4" Hex Driver
2651-20 (B77B) 18 Volt 3/8" Square Driver
2652-20 (B78B) 18 Volt 1/2" Square Driver
2602-20 (SER C15A) M 18 1/2" Compact Drill
ac2601-059 (SER D36A) 1/2" Compact Driver Drill
2601-059 (SER D36C) 1/2" Compact Driver Drill
2602-20 (C15B) M 18 1/2" Compact Drill
2650-20 (B55C) 18 Volt 1/4" Hex Driver
2602-20 (SER C15D) M 18 1/2" Compact Drill
2601-21 1/2" Compact Driver Drill
To replace this component, you will need a screwdriver:
1 First remove the screws holding the cover together
2 Carefully separate the housing to gain access to the armature brush holder
3 Disconnect the wires
4 Remove the screws securing the card swiping assembly
5 Remove the old brush holder install the new assembly Reassemble and test your tool
Package Included:
1 * carbon brush holder
Note:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.
