Delysia King Manual Electric Drilling Pump, Miniature Self-priming Pump, Household Small Water Pump, Hand Drill Drive Pump, Diesel Pump

Product name: drilling pump description: 1. Color: black 2. In order to achieve the best start-up and prolong the service life, add a small amount of lubricating oil to the pump inlet before use, and rinse with water after each use. 3. Make sure that the inlet hose is sealed and as short as possible. The hose should not exceed 9 feet (2.75 meters). 4. Working in the temperature range of 5°~49°C 5. It is recommended to install the pump on the surface for safe use. 6. Install and start the drilling rig. Observe whether a certain amount of fluid in the oil inlet pipe is sucked into the pump within 15-20 seconds. If not, check whether the oil inlet pipe is correctly installed on the oil inlet pump. Don't run dry. If the pump fails to start, check for kinks or blockages in the hose. The pump depends on whether the fluid is a pump for lubrication 7. The recommended speed is 1500-3500 rpm, and the head and flow are related to the speed. The higher the speed, the higher the flow. 1500 rpm, the head is about 1.5 meters, the flow is about 15L per minute 3000 rpm, the head is about 3 meters, the flow is about 30L per minute Note: Do not run the pump in reverse. Warning: Do not operate the main process drilling pump or drop the power cord into the water while standing in the water. Always stand on dry ground and keep all codes dry. Packing list: drilling pump * 1

Features: 1. Fine workmanship, plastic, durable and long service life 2. Large flow, stable performance, high efficiency and easy installation 3. The pumping speed is fast, and it can pump 15-30 L per minute (depending on the revolution/min drill bit) 4. Install all drill chucks, you can use an electric drill to take the pump, easy to use 5. Small and light design, portable and easy to store