Wire Material : TPE/PO
Core Material : Bare copper wire
Origin : Mainland China
Weight : about 320g
Bullet Points:
1、High Quality Lamp Holder: 100% brand new, high temperature and high pressure protection wire, copper wire ceramic lamp holder!
2、Waterproof and Anti-corrosion: It adopts 80A waterproof relay and high temperature fuse box, double-circuit push cabinet filament 100W/140W connection terminal and anti-corrosion tinning to prevent poor contact. High heat-resistant COT bellows and N66 material sockets do not melt. It Improves the brightness of the lamp about 30-50% brighter than the old vehicle lights.
3、Protect Original Car Lines: The original car lines and electrical components will not be burnt and damaged due to excessive current. The power can be increased to 100w, especially for vehicles modified to use 100 watt bulbs. It has a good protective effect.
4、Easy to Install: After installing this product, the brightness of the headlights of the annual inspection vehicle can reach the standard, and the installation is convenient. It can be directly assembled without changing the original car line.
5、Practicability and Versatility: It has strong practicability and wide versatility. Any vehicle can be directly assembled without affecting the vehicle itself.
Description:
1.H4 car headlight dimmer mainly increases the brightness of the light, prolongs the service life of the bulb, improves the safety of driving at night, and protects the circuit and related electrical appliances.
2.The installation is very simple: suitable for 12V H4 model bulbs. No need to worry about damaging the original car circuit when changing to 100/90W bulbs. Take electricity independently to protect the original car circuit.
Specification:
Name: Automobile H4 Headlight Relay Wiring Harness
Size(about): short line 40cm/15.75in, long line 160cm/62.99in
Packing size: 170*115*70mm/6.69*4.53*2.76in
Weight: about 320g
Packing List:
H4 Harness one for Two*1
Note:
Assembly Method:
1. Before assembling, check whether the working voltage of the model is 12 volts; the product with a voltage of 24 volts cannot be installed and used.
2. Connect the red line of the brightener power supply directly to the positive electrode of the battery, then unplug the two headlight sockets, connect one end of the original car to the brightener socket, and leave the other end empty.
Precautions:
The brightener has little effect on the life of the bulb. If there is a quality problem, it will be caused by the following conditions:
1. The original car's light bulb has been used to its limit.
2. The generator voltage is too high.
3. The quality of the bulb is poor, and it is recommended to use the original bulb.
Others:
1. Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
2. Due to manual measurement, there is a tolerance in the product size.
