1Pc 30Mm Stroke 2-Phase 4-Wire Linear Screw Slider Actuator Nut 13.2 Ohms Mini Precious 6Mm Planetary Gear Stepper Motor

Specification: A miniature 6MM planetary reduction stepper motor with a precision driver slide table. The motor specification is a 6 * 7.5MM two-phase four wire stepper motor, which requires an external stepper motor driver to operate. The stepper motor passes through the planetary reduction box and then drives the driver to move the slider up and down. The maximum stroke is about 30 mm, which is about 5800 pulse signals to complete the stroke. Parameters: Motor wire length: approximately 100mm Motor internal resistance: approximately 13.2 ohms 5V short-circuit current: 0.32 A Motor type: Two phase four wire stepper motor (requires an external driver to operate) Sliding table travel: approximately 30 mm One pulse signal stroke: approximately 0.0052 mm 5800 pulse signals are required to complete a 30 mm journey Packaging: 1PC Description: By powering on the test machine, we can smoothly control the sliding table to rise or fall with the driver and controller on hand. The sound is quiet, and the motor can work normally when the current is set to 0.14A. When it is set to 0.28 A, the motor is prone to overheating. Due to the fact that the motor itself is suitable for medium and low frequency pulse signals, and also passes through a planetary gearbox, the sliding table can only slide at low speed and cannot move quickly. Please understand, buyer friends.

Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please refer to the actual product received. 2. Please allow slight manual measurement deviation for the data. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.