Nano Battalion Bass Preamp Overdrive Bass Effector ELECTRO-HARMONIX &

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. All-analog circuit with MOSFET drive that allows for great tones and variations. 3-band EQ and 3EQ position modes for maximum sound-shaping control and flexibility It is compatible with basses equipped with either active or passive pickups. Equipped with a 1/4 output that supports both unbalanced and balanced output. EHXJP9.6DC-200 included With its all-analog circuitry, the NanoBattalion produces an astonishing variety of bass tones in a robust and compact package. A MOS-FET drive circuit forms the heart of the pedal, allowing for everything from light overdrive to fully saturated distortion. NanoBattalion features a 3-band EQ with three EQ position modes for maximum flexibility and sound-shaping control. The 3-band EQ consists of a Treble that boosts/cuts the band above 1kHz, a Bass that boosts/cuts below 200Hz, and a Mid switch that boosts/cuts up to ±9dB with 500Hz as the center frequency. The EQ section can be placed in one of three signal path positions. The NanoBattalion is equipped with 1/4 input/output jacks, and outputs an unbalanced signal when connected to a monaural cable, and a balanced signal when connected to a TRS cable, so it can be used with mixing consoles or recording interfaces. It is possible to connect directly to the interface.