Feature:
1. Multifunctional: This network cable tester includes poe tester, anti interference network cable scan, conduction tester, voltage test, fault distance locator, port flashing, vibration mode, volume adjustment, multimeter, line length test and LED torch function.
2. 3 Mode Switching: This network cable tester has a unique anti interference digital scan mode, analogue mode, Poe mode. 3000m maximum cable finding distance. 16?20VP P super strong signal to the cable tracer. You can set the frequency and the three modes can be switched freely. Equipped with a professional analogue tone generator, which makes a louder sound when it is close to the target cable. The sensitivity of the sensor can be adjusted using the scroll wheel on the cable tracer receiver to narrow the tracking range. A silent vibration mode can also be used to avoid disturbance.
3. Multiple Measurements: The multifunction multimeter can measure or test temperature, continuity, voltage, current, resistance, diodes, NCV and more. All accessories required for measurements are included in the package. Network cable tester, multimeter with DC AC voltmeter and ohms voltammetry in one, circuit tester to measure voltage, current. k type probe to measure temperature 20?1000 degrees C, AC voltage, current test range 4?400V, 1.0A?10A. NCV power display and diode test.
4. Hub Blink: The network cable tester identifies the pins providing power and detects the voltage, locating the network port by the blinking port lights on hubs and switches (blinking every 1 second). Suitable for use with 600M hubs switches. Measurement range includes circuit tracing, short circuit testing, breakpoint identification, etc.
5. Fully Equipped: The cable length measurement can be done with 2 core metal cable, CAT5 CAT6 network cable, telephone cable, coaxial video cable. The cable tester includes transmitter, receiver, crocodile clip cable, temperature K type test cable, RJ45 cable, USB cable, 9V battery.
6. Long Continuous Operating Time: The cable tester is equipped with a 1250 mA rechargeable lithium battery, which can operate continuously for 8 hours or standby for several months on a 3 hour charge from a 5V 2A charger. The receiver uses a 9V battery for up to 2 hours of continuous operation.
Specification:
.Item Type: Network Cable Tester
Material: ABS
Analogue Line Finding Function: Yes
Short Circuit Pass Through: Multimeter measurement
Powered POE Switch: Yes
Pair Function: Yes
Switch Light Port Flashing: Yes
Noiseless Digital Line Hunt: Digital vibration
Line Voltage: Multimeter measurement
POE Voltage Measurement: Yes
Operation Wiring Indication: Yes
Other Features: Multimeter pen prompt function, length self calibration function, LCD display, white torch function, adjustable volume for analog line finding, adjustable sensitivity for digital line finding, low voltage detection, white backlight, Adjustable sensitivity for digital tracing, low voltage detection, white backlight
Other Features: Energy saving design, line finding distance of 3KM, switchable analogue line finding frequency
Red Light Pen Function: Yes
Multimeter Function: Yes
DC Voltage: 400mV1000V+(0.8percent +3)
AC Voltage: 4V400V+(1 .5percent +5)
DC Current: 1.0A10.0A+(1.2percent +4)
AC Current: 1.0A10.0A+(2.0percent +5)
Resistance: 200 Ohm 20M Ohm +(2percent +6)
On Off Beep: < 50 Ohm buzzer beeps
Diode: Yes
Temperature (Type K): 201000 degrees C+(2.0percent +15)
Network Cable Length Measurement: Approx. 600m 1968.5ft
Coaxial Cable Length Measurement: Yes
Network Cable Short Circuit Broken Circuit: Yes
Battery: Main Unit: 1 x 1250mAh rechargeable lithium battery (included), Wire Finder: 1 x 6F22 9V 800mAh dry cell battery (included)
Package List:
1 x
Network Cable Tester1 x Host Lanyard1 x USB Cable1 x Instruction Manual1 x Cable Finder1 x Battery2 x Test Pen1 x Temperature K Type Test Cable1 x RJ45 Cable1 x Crocodile Clip Cable1 x Storage BagMultifunctional: This network cable tester includes poe tester, anti interference network cable scan, conduction tester, voltage test, fault distance locator, port flashing, vibration mode, volume adjustment, multimeter, line length test and LED torch fu
3 Mode Switching: This network cable tester has a unique anti interference digital scan mode, analogue mode, Poe mode. 3000m maximum cable finding distance. 16?20VP P super strong signal to the cable tracer. You can set the frequency and the three modes
Multiple Measurements: The multifunction multimeter can measure or test temperature, continuity, voltage, current, resistance, diodes, NCV and more. All accessories required for measurements are included in the package. Network cable tester, multimeter w
Hub Blink: The network cable tester identifies the pins providing power and detects the voltage, locating the network port by the blinking port lights on hubs and switches (blinking every 1 second). Suitable for use with 600M hubs switches. Measurement r
Fully Equipped: The cable length measurement can be done with 2 core metal cable, CAT5 CAT6 network cable, telephone cable, coaxial video cable. The cable tester includes transmitter, receiver, crocodile clip cable, temperature K type test cable, RJ45 ca
No-delivery refund
