Lala Mix Case Raft Rod Holder Rod Holder Rod Keeper Rod Stand Rod Rest Fishing Rod Fishing Rod Stand Vertical Horizontal Placement Rock Fishing Boat

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- [Angle adjustment of rod holder] The angle adjustment screw (star-shaped screw) installed at each arm connection part allows you to easily adjust the rod holder angle. *Star-shaped screw drivers are sold at 100 yen shops. If the concave width of the screw matches, you can also use a flathead screwdriver. [For downward reels only] A deep slit is provided at the bottom of the contact area of the rod holder to prevent line interference during retrieval. [Installing the base] The angle adjustment screw on the base allows it to be installed not only horizontally or vertically, but also on an inclined base. [Installation width of base] Installation width: 3cm - 10.5cm *Adjustment to less than 3cm is possible by inserting a piece of wood, etc. [Can be fixed directly to a raft] The lower base can be separated, and by using the base screws, it can be directly attached to a fixed base such as a raft. *Base screws are not included with the product. [Size and weight] Storage dimensions: 26cm x 14cm x 6cm [Weight] 385g [Rod holder angle adjustment] The angle adjustment screw (star-shaped screw) installed at each arm connection part allows you to easily adjust the rod holder angle. *Star-shaped screw drivers are sold at 100 yen shops. If the concave width of the screw matches, you can also use a flat-head screwdriver. [For downward reels only] A deep slit is provided at the bottom where the rod holder makes contact to prevent line interference during retrieval. [Installing the base] The angle adjustment screw on the base allows it to be installed not only horizontally or vertically, but also on an inclined base. [Installation width of base] Installation width: 3cm - 10.5cm *Adjustment to less than 3cm is possible by inserting a piece of wood, etc. [Can be fixed directly to a raft] The base can be separated from the main body, and can be attached directly to a fixed base such as a raft by using the base screws. *Base screws are not included with the product. [Size and weight] Storage dimensions: 26cm x 14cm x 6cm [Weight] 385g