Package Included: (Send it as your choice, as the option shown)
F4 F405 Flight Controller:
Product Parameters:
MCU: STM32F405RGT6 168MHz
Gyroscope: Mpu6500/ICM42688 (send at random)
Baro:Bmp280/DPS310 (send at random)
OSD: Betaflight SPI OSD DJI HD OSD(UART5)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)
1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)
VTX 9V filtered power
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,
The default receiver input is UART2(You can solder ELRS RX on UART2).
Power:
Input voltage: 3-8S
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LDO 3.3V: Max.1A
FC Firmware:
BetaFlight firmware: DAKEFPVF405
INAV firmware:DAKEFPVF405
Mounting:
Installation size: 30.5mm × 30.5mm The installation hole is M4 and supports shock column installation
External size 36mm × 36mm
Flight control weight: 6.9g
Flight control onboard voltage sensor.
No-delivery refund
