Auto Brake Hold Kit for the 2024 Yaris Cross Spec Switchable Easy Installation (after Changes) - Function, Plug-and-Play

[Compatible models] Yaris Cross [Compatible years] January 2024 (Reiwa 6) onwards [Compatible models] 5BA-MXPB 10/15 6AA-MXPJ 10/15 [Product contents] Wiring kit, plastic remover, installation instructions After closing the driver's door, fastening the driver's seat belt, and turning on the engine, the brake hold function will automatically enter standby mode. Easy installation with a completely plug-and-play design! All wiring has connectors, so installation is easy and won't damage your factory wiring. This product also features an on/off function! Simply press and hold the brake hold button after fastening your seat belt to return to factory settings. No need for troublesome removal during vehicle inspections! Brake Hold can be used in conjunction with our "One-Touch Turn Signal" and "Tire Pressure Monitoring Warning System"! To connect them simultaneously, simply connect the products in series in any order! If you purchase them at the same time, you can install this product at the same time, eliminating the hassle! Brake hold is a convenient feature that allows you to take your foot off the brake pedal while stopped, such as when waiting at a traffic light. However, with the original system, the brake hold function is deactivated when you turn off the engine, open a door, or undo your seat belt, so you have to press the switch every time. By installing the Auto Brake Hold Kit, the brake hold function will be automatically turned on every time you start the engine, refasten your seat belt, or open or close a door, without having to press the HOLD button each time. [Product contents] ・Wiring kit ・Plastic remover Installation instructions [Notes] *If you unbuckle your seat belt or open the driver's door while the brake is on hold, a warning message will appear and the parking brake will be forcibly applied. Also, if the vehicle is stopped using only the hold brake for more than three minutes, the parking brake will also be applied (same as the original specifications). *If you start the engine while in standby mode, the vehicle's system protection will be activated, and you will not be allowed to operate the brake hold function, and an error message will appear stating, "Brake hold cannot be turned on due to system protection." In that case, you will not be able to use the functions of this product. By disabling system protection, you will be able to use the product's functions. Please contact your dealer for information on how to disable standby mode or system protection.