GIMUYA Swing USB LED Car 8 Auto Memory Ambient RGB USB Mini Compact and Easy 1 Piece Light, Type-A, Colors, 180° Swivel, On, Dimmable, Function,

1. [Swing Type-A USB Light] This ambient light automatically turns on when it gets dark by simply connecting it to a Type-A USB port in your car. It has a wide range of applications and can be applied to all vehicles and equipment with Type-A ports. Package Contents: 1 x USB LED Light Type-A. 2. [Light Sensor & Dimming Function] Equipped with a light sensor, the light automatically turns on and off depending on the ambient light. It eliminates the need for frequent operation, making it convenient to use. You can also easily adjust the brightness by pressing and holding the button for more than 2 seconds. 3. [3 Lighting Modes & Memory Function] ① Single Color/Gradient Mode: Press the button once to switch between 8 colors and gradients. ② Firefly Mode: Press the button twice to alternate between softly turning on and off. "Pressing the button twice in Firefly Mode will return the light to a single color." Furthermore, the built-in color memory program allows the light to return to the previously set color after restarting the engine! No need for tedious re-operation, making it extremely convenient! 4. [Switchable Light Direction & 180° Swivel] This USB light has four LEDs. Press the button three times to automatically cycle through the following sequence: all lit ⇒ LED ① lit ⇒ LED ② lit ⇒ LED ③ lit ⇒ LED ④ lit ⇒ LED ①② lit ⇒ LED ②③ lit ⇒ LED ①②③ lit ⇒ all lit. Press the button once at the desired lighting direction to lock it in place. Furthermore, the USB light itself can rotate 180°, allowing you to swing it as needed to illuminate the desired area. 5. [Compact & Lightweight] Voltage/Output: DC5V / Max 0.5W; Weight (approx.): 3g/pcs; Compact and easy to carry! *Please note: 1. If the light is flashing: This occurs because the brightness is set to the limit. Solution: Press and hold the switch button for 3 seconds or more until the brightness increases and the flashing stops. 2. If the light turns off when the USB is fully inserted: If the light is only partially inserted, the light sensor will react and automatically turn off in bright surroundings. Solution: After fully inserting the USB, press the switch four times in succession (this will switch to light sensor OFF mode). *The product may become hot if your car's electrical system has been modified.