Kaito Denshi LED Strip Light for Cars, 12V, High Density, 240 LEDsm, Waterproof, Exterior Lighting, Steady-On, Front-Flashing, Cuttable,

[Overwhelming Density and Ease of Installation] Equipped with 240 LEDs per meter, four times the number of LEDs compared to conventional LED strips (60 LEDs per meter), it creates a light source that is as close to a linear effect as possible. The red and black power cord extending from the strip itself is 1 meter long, greatly improving installation! [Waterproof Performance & Flexible Layout] The base of the strip light is waterproofed with a transparent tube (note that additional waterproofing is required at the ends). The flexible tape design allows for easy installation on curved surfaces, and the length can be freely adjusted as needed with cut lines approximately every 1.3 cm. [Highly Versatile for Multiple Uses] In addition to automotive applications, it can be used for interior lighting, indirect lighting, under-shelf lighting, backlighting behind TVs, in-car lighting, store display lighting, and a variety of other stylish spaces. [Easy Installation and Operation] The LED strip light comes with double-sided tape on the back for easy installation without tools. Simply connect it to a power source and it lights up, no complicated operation required. Only the 500cm length has power cords extending from both ends of the tape (you can cut it in half and use two).

[Dimensions/Specifications] Tape length: 500cm / Tape width: Approx. 9mm / Tape thickness: Approx. 3mm / Cable length: Approx. 1m / Red wire: Positive (+) Black wire: Negative (-) / LED specifications: 2835SMD / Input voltage: DC12V / Circuit board color: White base / Power consumption: Approx. 51W / Current value: Approx. 4.2A / Number of LEDs (per 1m): 240 LEDs *One LED may be covered by the shrink tube. / Waterproofing: Tape light body only / Cut lines: Every approx. 1.3cm (see photo)