Producent code: 10020229The TRON 200 multi-process welder enables efficient and safe metal joining using MIG/MAG, TIG, MMA, or FCAW methods. Operating modes are selected without problems and you can quickly switch between them thanks to the efficient IGBT inverter. Effect: almost flawless, high-quality welds. The device has 10 operating programs. To set them, you need to define your own presets and save them.. So there's no need to re-enter the welding parameters every time. The welder will save all settings. The clearly visible control panel allows you to select all parameters. The knob and buttons used for function selection are easily accessible even when wearing welding gloves.. The intuitive menu allows for hassle-free changing of welding parameters.. Selected values are displayed on a clear LED display. In MIG/MAG welding, gases protect the weld - in the case of MIG welding, these are inert gases, and in MAG, active gases.. This method allows for fast and effective welding. The wire feeder has a speed from 2 to 14 m/min and is designed for wires with a diameter from 0.6 to 1 mm. For MIG welding, you can use the wire feeder handle (not included in the set), which under the welding wire directly to the torch. Thanks to the synergy function, you will optimally set all parameters during MIG/MAG welding. You will select the welding current from the range of 50 to 200 A, and the welding machine will automatically set the remaining parameters, such as welding voltage and wire feed speed.. TIG - welding metals with a narrow heat-affected zone and a small amount of rework The TIG method in the TRON 200 device involves using Liftarc ignition to activate the arc. Thanks to this, sensitive electronic devices located nearby, such as mobile phones, computers, or control systems, will not be exposed to external factors.. Tungsten precipitates and you have an ignition problem? Thanks to this process, you can forget about it - even with long hose sets. TIG welding is suitable for welding most metals with a thickness of 1 mm and greater. You will be working with a small amount of sparks and spatter, in any position. Effect: high-quality, clean welds and almost no deformation. Do you want to weld outdoors and in strong winds - choose electric arc welding (MMA). This method works without using additional gas. The welder generates a very stable current - ideal for achieving good welding results. The Arc Force and Anti Stick functions turn on automatically and enable comfortable welding. FCAW welding involves creating welds using welding wire - without additional gas. Thanks to this, the method is very useful - ideal for small outdoor repairs.Product features: - Versatility thanks to TIG, MIG/MAG, MMA and FCAW methods, - Easy operation - simple navigation through the digital menu with 10 programs, - Quick switching between welding functions and 2T/4T modes, - Convenience thanks to the synergy function and easy selection of the wire feeder gun, - MMA Welding with VRD, Anti Stick and Arc Force. Technical parameters: - Catalog number - 10020229 - Item condition - New - Model - TRON 200 - 2/4 Beat - Beat - Anti Stick - Tak - ARC-Force - Tak - Water cooling - No - Duty cycle [%] - 30 - Flux Wire - Yes - Gas solenoid valve - Yes - Hot Start - Nie - MMA Cable - 3 m - Insulation class - F - IEC Protection Class - IP21 - Maximum weldable thickness [mm] - MIG: 5 / MMA: 1,5 - 10 / TIG: 1 – 5 - Maximum input current [A] - MIG: 33.9 / MMA: 38,3 / TIG: 25.8 - Input power [kVA] - MIG: 7.5 / MMA: 8.75 / TIG: 5,6 - Voltage [V] - 230 - Welding voltage [V] - 15-24 - MMA welding current [A] - 40 - 200 - TIG welding current [A] - 15 - 200 - MIG/MAG cable - 3 m - TIG cable - 3.8 m - Grounding cable - 3 m - Soft start - Tak - Efficiency [%] - ≥80% - Wire speed [m/min] - 41671 - Wire diameter [mm] - 0.6,0.8,0.9,1 - Power factor - 0.73 - TIG Ignition - LIFT - Rated input current [A] - MIG: 36 / MMA: 41,7 / TIG: 27 - Dimensions (DxSxW) - 21.5 x 44.5 x 37.5 cm - Shipping dimensions (DxSxW) - 59 x 41 x 42 cm - Weight - 19.2 kg - Shipping weight - 24.8 kgIn the set: - TRON 200 multifunctional welder - TIG torch with cable, 3.8 m - MIG torch with cable, 3 m - MMA holder with cable, 3 m - Ground cable with clamp, 3 m - 3 bushings (1,6/2,0/2,4 mm) - Collet chuck in housing - 3 ceramic gas nozzles (4, 5, 6mm) - TIG electrode Ø2 mm - MIG gas nozzle - MIG contact tip, Ø0.8 mm - Long burner nozzle - Short burner cap
No-delivery refund
