Description:
Category: Car stickers
Size: 200*25CM
Color: Black,Red,White
Feature: Temperature resistant, no shrinking, waterproof, long-term durability...
Usage:
1.Clean your car surface where will be pasted.
2.Tear off slowly and paste the sticker on your car.
3.Wait for it to dry.
Color: black, white, red
2. Installation method of large car sticker with transparent transfer film (wet sticker method):
Tools: rag, sprinkler, scraper or credit card
1. Clean the body, and evenly spray water on the body part to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.
2. Determine where to post. Slowly stick it on one side, scrape it gently with a tool, and peel off the bottom paper.
3. When encountering door handles or anti-scratch strips, cut the materials and pack them in according to the situation.
4. Properly adjust, after confirming the approximate position of the figure, wipe off the water and air bubbles repeatedly. Tear off the transparent transfer film.
5. Make a cut with a utility knife on the car door and sewing, and stick it inward.
6. Don't let the car sticker and the body have any separation or protrusion.
7. Try to let the moisture in the car sticker dry out, and if possible, it can be heated and dried appropriately. Depending on the weather, wash the car again after a day or two.
In order to reduce the difficulty of customer installation, the car stickers we provide have been covered with transfer film in advance. (Except for the whole block of continuous graphics)
How to remove:
Use your nails to gently scrape the edge of the sticker, and then tear it off completely, without leaving marks or damaging the paint. In winter, if it is cold and unable to scrape the corners, use a hair dryer to properly heat the adhesive tape, and the adhesive can be easily removed after it has melted and softened.
Precautions:
1. Do not wax one week before deciding to dress up your car. The wax will make the sticker not stick firmly; do not wash the car within three days after the car sticker is pasted, and do not put it on rainy days. The effect will not be good!
2. If the sticker needs to be pasted on the door seam or other places that need to be moved, do not worry, just cut it off with a sharp knife after it is pasted.
3. If you really do not want to do it, please go to the local place where you put the solar film for help.
Packing list:
1 * Car stickers
Note: All images and descriptions are for illustrative purposes only, the color deviation is subject to actual system configuration.
