433Mhz Auto Copy Wireless Remote Control Rolling Code Duplicator Key Fob 433.92 MHz Fixed Code Transmitter For Gate Garage Door

Features: The chipset compability: All of Fixed code and learning code2260(All the manufacturers)2262(All the manufacturers)PT2264,5326(All the manufacturers)SC5262,HT600,HT680,HT6207,HT6010,HT6012,HT6014,SMC918 Series,527(All the manufacturers)1527(All the manufacturers)2240(All the manufacturers)

Package Included: 1*Remote Control

NOTE: If your chip code cannot be found above or your remote control is a rolling code remote control, please contact us to confirm if your remote control can work with our item or not

Remarks: For fixed code &learning code remote controls, the duplicator will work after duplicating. But for the rolling code brand listed above, please follow the original manual to program the duplicator to receiver after duplicating

Here is the way of copy Memory clearance 1.Press button 1 and 2 simultaneous until LED flashes 3 times 2. Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED flashes quickly. 3. Release both button, the duplicator is ready for copying

Duplicating Put duplicator aside of original transmitter, as close as possible.

Fixed code remote control: Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator's LED flashes means the duplicating succeed. Repeat above step to the rest buttons. The duplicator will work after duplicating.

Rolling code remote control: Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator's LED flashes means the duplicating succeed. Once 1 button duplicated, the rest buttons will generate automatically, please follow original receiver manual to insert the new duplicator on the receiver.

If you erase the code by mistake, you can resume it by pressing and hold both of the ''3'' and ''4'' button on the remote controllers at the same time, after 10 seconds, the LED flashes 2 times and turn off which indicates the code of the copy remote controller is resumed.