FSIEL's strongest lumens h8 h9 h11 h16 hb3 hb4 h1 h3 h3c h7 led headlight legendary series Compatible with popular Hiace 200 series, Serena C27, 30 Prius, Aqua, and many more. LED bulbs are more than 10 times brighter than halogen bulbs. Not only is it bright, it will almost reduce the amount of lumens right after lighting until it is stable, and it will maintain its peak brightness over time. be mounted on low beam, high beam or fog lamps, and 4 colors to choose from: yellow, white, lime yellow, and light bulb (halogen / warm color). Some valve shapes are not available in colors
Stunningly bright over time. The FCI LED will almost diminish its brightness even after it is steadily. We have developed an LED that will stay bright instead of considerably darkening in just a few minutes of lighting. The difference is more than 10 times compared to genuine lights (compared to genuine h16 shape bulbs). The number of h16 is our measurements). We use a domestic third party agency to measure the lumens of the product. Instead of the amount of lumens after lighting the car lights are brightest, we set the brightness of the lumens after 5 minutes = the brightness that actually illuminates the road etc. We have tried measuring lights from other companies that have the same amount of actual lumens, but other products have reduced brightness by 20% compared to the product right after they are turned on. FSIL is able to maintain a high level of brightness even after being stable. All LED products will be bright right after light up and stable in minutes after diminishing brightness. Even after being lit directly, it cannot maintain the same brightness as LED specifications. Therefore, please be aware that the number of lumens is
Emitting Point Same as Original Products: LED chips are closer to each other, producing almost 360° light emitting just like genuine halogen. Not only are they bright, but they also have the same illumination point as the original, so they do not create any blind spots, so that they perform at their best. The position of the emitting point and base are designed just like the original, eliminating glare and cut line distortion caused by too glare, and preventing the glare of pedestrians and oncoming vehicles
High Heat Dissipation and Long Life: Heat dissipation is important for high lumen LEDs. Brightness = Because the chip generates a lot of heat, low heat dissipation may decrease brightness over time, and the service life is greatly shortened. Therefore, FCIL has been designed with calculation from materials to design for maximum cooling effect. The cooling fins, heat pipe construction, aluminum alloy, and silent fans, etc., are designed to efficiently dissipate heat to prevent premature failure caused by heat, and maintain brightness even after lighting up. In addition, it is IP66 certified waterproof and dustproof, so it be used for a long time with confidence even in bad weather such as rain or snow
Compatible with car inspections: This product meets domestic car inspection standards including colors, cut lines, etc. In addition, the FCL will be exchanged and inspected for all parts (1 year warranty) and have a peace of mind. We inspect the cut lines and the number of lumens that meet the vehicle inspection standards by professional agencies in Japan, and confirm whether the color is the vehicle inspection standard. Lime yellow is a yellow product that meets vehicle inspection standards, but in rare cases it may not be compatible with car inspections due to the judgment of an inspector. Regarding the warranty, other companies' long-term warranty is limited to the limited number of exchanges (only once) during the period of time, and there may be cases such as only some parts in the product set may be short, but our company will also support the [many times] if the product has been a second failure during the warranty period. In the event that the product is defective, we also pay the [return and forth shipping cost] and the support is supported by professional staff domestically, so in case of any problems or problems, please contact our customer support directly
Note: Cannot be installed on vehicles that require a valve adapter. There is polarity, so please insert it in the opposite direction if it does not light up. Since the fin part is too hot, please avoid contact with wires and tie wraps, and avoid heat dissipation and fan interference. If the original fuse is less than 15A, we recommend replacing the 15A fuse or using a relay harness (sold separately). There is a risk of fuse running out. There may be cases where the waterproof cover of the back cover may be required. The lime yellow is under vehicle inspection standards, but it may not be compatible due to the judgment of the inspector. Waterproof rubber may rarely be damaged. In that case, please replace with the included spare rubber (may not be included depending on the time of purchase). In import vehicles, you may need a relay harness or canceller, which is sold separately in order to avoid fuse outage. The temporary flashing of the engine is based on the vehicle specifications
We will only accept returns if the item is different from the picture shown
on the product page or is not in the same condition as the product description.
All items are 100% authentic: we verify authenticity before selling.
No-delivery refund
