The casing is made of aluminum and the product has good heat dissipation performance and erosion proof.
The whole circuit board is sealed with epoxy resin, which makes the product more resisting to wet, erosion and vibration.
Applicable to the charging of various brand model 12V and 24V batteries, select 12V or 24V battery charging mode by .
Features:
The casing is made of aluminum and the product has good heat dissipation performance and erosion proof.
The whole circuit board is sealed with epoxy resin, which makes the product more resisting to wet, erosion and vibration.
Applicable to the charging of various brand model 12V and 24V batteries, select 12V or 24V battery charging mode by .
Working voltage AC80.275V, working frequency 20.600Hz, can that the engine can still be d at low speed (idle speed).
The electric energy of the generator set can be directly d to replace the fuselage .
It can be used in a humid environment with a temperature of -40 degrees C . +65 degrees C and a relative humidity of 98 % without condensation.
Allows the motor to be started while the utility is charging the battery.
Applicable to -acid batteries, especially suitable for charging sealed wide temperature batteries.
Can be self-stopping for constant current, constant voltage and turbulence of the battery.
function: Since the system adopts the design, it will not generate a large due to the power . In addition, when the is connected online, it will not interfere with the power supply system just after the power is turned on.
Specification:
Constant Current Fast : When the voltage of the d battery is lower than the set value (12V battery pack
When the is charging the battery at the maximum constant current.
Current Limiting: When the d battery is nearly full (12V battery pack more than 12V, 24V battery pack more than 24V), the charging current is automatically limited.
Turbulent Floating : When the voltage of the d battery reaches the floating setting value (12V battery pack is about 13.8V, 24V battery pack is about 27.6V), it will automatically to the floating state, that is, about the current 0.1 .0.2A is d (specifically related to the current power consumption of the powered device).
Stop Charging: When the voltage of the d battery reaches the filling set value (14V at 12V and 28V at 24V), the output is automatically turned off.
Over-Current and Short-Circuit : The product has perfect over-current and short-circuit . Due to the constant current characteristics of this product, when the battery capacity is large (the internal resistance is very small), the load is short-circuited or started during the mains charging period. In the case of a motor (the starting current is very large, it is close to a short circuit for the ) and it will not be damaged. At the same time, due to this characteristic of the product, the does not need to be disconnected when the battery is used as a starting power source.
The product panel is equipped with indicator lights (light-emitting diodes). When the indicators are in different colors, it represents the different working conditions of charging.
Red: constant current fast charging phase, that is, the charging current is the rated maximum current value (including red when the output terminal is short-circuited);
Yellow (red + green): the slip current floating phase (constant voltage), that is, the charging current begins to decrease, the current is larger when the lamp is red, and the current is less when it is greenish;
Green: The battery is almost full (green when the output is open).
Package List:
1 x
1 x Users Manual
Note:
The product is specially designed for charging the battery. Since the output contains pulse components, it is not suitable for direct use as the power sourc
No-delivery refund
