Uninsulated CU Sleeve KLA 6-20 ERKO 100pcs

Tip (sleeve) connecting Cu KLA 6-20 /2pcs.Technical dataManufacturer: ERKOSeria product: KLAIndex manufacturer: KLA_6-20/100For enameled wires NOFor non-load-bearing connections NOFor flat cable NOFor single-core wires YESFor stranded wires YESFor round wires YESFor multi-core wires YESFor high temperatures up to 650 °CEAN 5905912831689Insulation NoneNumber of branches 2Material CopperModel Standard versionNominal cross-section from/to [mm2] up to 6Nominal cross-section from/to [mm2] from 6Type of connection Parallel connectorType of ferrule LongSurface protection TinningAWG range up to 6length 20mmcopper CUquantity 2pcs.Tinned YESCable pipe crimp connectorsCopper pipe cable connectors (tinned),  (galvanized)  (in accordance with DIN 46267) are used for end-to-end connection of wires of the same cross-section. The use of pipe cable connectors increases the safety of the connection and its durability.. It is important to remember that these types of connections cannot be mechanically loaded. All copper pipe fittings undergo an additional process of hardening and firing at a temperature of 700°C.. This process removes all contaminants from the material from which the connector is made. Hardened fittings, unlike unhardened ones, are less prone to cracking and micro-cracking during crimping, and thus have better operating parameters.. Crimping effectiveness (cable connector mounts) depends on the use of the appropriate tool and the die matched to the cross-section.material:for tips : electrolytic copper (compliant with EN13600) minimum layer of tinning: 3μm tip : electrolytic copper (according to EN13600)for tips : electrolytic copper (compliant with EN13600)minimum layer of tinning: 3μm length 20mm