75cmX300cm VLT 18% Blue Chameleon Truck Car Side Window Rear Windshield Foils, Color Change Solar Tinting Anti Look Films

Hign-concerned Chemical : None Position : Side Windshield Special Features : Scratch Resistant Material Type : PET Item Weight : 0.2kg Item Width : 75cm Item Length : 300cm Color Name : chameleon purple External Testing Certification : CCC Model Name : ST-F653-02-3M Window Foils Type : Front Window Solar Protection Transmittance : 10%-20% Heat Insulation Rate : 80%-100% Ultraviolet Blocking Rate : 80%-100%

Origin : Mainland China Item Type : Window Foils & Solar Protection

Read before you buy!!!

The color of the film will become darker and darker with the intensity of sunlight; The color of the film may differ when viewed indoors and outdoors.Meanwhile, depending on the model of the car, the inclination and curvature of the glass, the color of the film will also appear different. The color changes are different from each other. This is the chameleon optical effect. Because this film is 2 mil thick, so it is not easy to shrink.you can touch it and compare with other films. it is a little thicker than ordinary films. This is for car window stickers. This Chameleon film thickness is 0.01mm(2mil). Common sense that the thicker the thickness, the harder for installation. The thickness of ordinary window stickers is only between 1.3 and 1.5mil. Please use much more soapy water to wet the window glass and film (both sides of film) if you find it difficult to move.

don't forget to heating the film on outside windshield before apply to inside windshield."heating film" is a step to make the film to have shape of curvy glassread the Description and watch this video in this link https://www..us/item/1005006019407664.html?gatewayAdapt=glo2usaINSTRUCTIONS:Notice: Measure the size of the car glass, the length and width of each one plus more than 3 cm, so as not to install the film  does not conform to size.A clean window is vital a successful factor,so keep window or glass clean.The first step : put the film outside of the window and heating the shape offilm. don't peel off the backing in this step. refer to this videohttps://we.tl/t-Crhk1gtsVqheating time is half an hour.The second step: remove your old film in the car, Clean the glass withSpecialized degumming detergent. Clean the glass at least three times to ensurethat all old glue is removed.The third step: refer to this installation video https://we.tl/t-U3mQISBJeLNOTE:1.Before installing , please check the film carefully,if you find any creases,tears or other defects,please contact us immediately for advice.Don’t remove the backing sheet or attempt to fit your film .We are unable to accept returns or provide refunds if installation has been attempted.2. After installation, don't wash car and don't drive in the rainy day. Specification:1.Material: PET2.Size:0.75*3M3.Transmittance rate:20%4.UV protection :99%5.Insulation:90% Packing Includes:1 Roll Car Window Film