Universal Adhesive T-8000 110Ml

E-8000 Glue 110mlE-8000 is a special adhesive for joining plastics and metals. Can be glued to PP / PE plastic. E-8000 glue is a colored, environmentally friendly, non-polluting, non-corrosive, one-component, multi-functional universal adhesive which cures by air at room temperature, is safe and convenient to use, and has excellent water resistance, moisture resistance, and shock resistance. It has excellent anti-aging and sealing properties. After curing, it is soft and flexible. It has excellent adhesion. The temperature range is -30°C. ~ + 90oÇ.E-8000 glue is widely used in: PP / PE / PS / PO / PVC / ABS / rubber, plastic, leather, sponge, wood, paper, toys, glass, ceramics, metal, crystal jewelry, lighting, fabrics, handicrafts, headphones.PRODUCTION DATE OF THE GLUE IS LOCATED ON THE SEAL!Application:in the GSM industry for gluing frames, touchscreens, housings in the process of replacing cracked screensin jewelry productionmetal, glass, ceramics, stone, bamboo, fabrics, leathers, PVC, ABS, nylon, sponge, film, fabrics, electronic components, plastics, rubber, fiber, paper, mobile phone bezelin the repair of electronic devicesin car workshopsTo remove the glue, it is good to heat the glued element. Then the glue becomes soft and easily removable. Also used as a universal household glue. Product features:excellent resistance to water, acids and alkaline environmentsexcellent dielectric insulation propertiescuring at room temperature 18-32°Cwaterproofcreates a flexible, soft filmhas anti-vibration properties

Instructions for use:Read the instructions before use. Use only in a well-ventilated area.. The glued surface should be clean, dry, and free of dust. The surface should be rough before use to ensure greater bonding strength. It can be used between 18°C and 32°C. The best temperature is the range between 21°C and 29°C. The adhesive can withstand a temperature range from -40°C to 66°C. Apply it directly to the surface to be bonded, press firmly, it will start to thicken after about two minutes. To achieve higher strength, leave the bonded parts to dry for 48 hours.. When the temperature is low, the curing time will be extended.. When the temperature is high, the curing time is shortened. Storage method: Store at a temperature of 18–27°C

Technical data Content of solids: 48%-55%Appearance: translucent, medium viscosityHardness after complete curing: 65-80A Surface drying time: about 3-6 minutesGeneral curing time: 4-8 hoursFull curing time: 24-48 hoursStorage time: save from 10 to 28 degreesCapacity: 110mlProducer: depending on the deliveryNotesMay irritate skin and eyes.Keep out of reach of children.Use in a well-ventilated area.In case of contact with eyes, rinse with plenty of water.Keep away from children's store, production operations, keep away from fire.Do not allow the adhesive to overflow onto the PCB area.Degrease and dry both surfaces to be joined.Apply an even amount of adhesive to the surfaces.Press together and wait at least 3 minutes for initial setting.