SOLDERING STATION 2in1 hot air T12 Yihua 706 II precise powerful UPGRADEDFast, clean and professional soldering – no frustration, no compromises. And all this thanks to the reliable YIHUA 706 II soldering station. This is not an ordinary station – it is a powerful and precise tool combining HOT AIR and a T12 soldering iron, which will make your work faster, more accurate, and more enjoyable.
Why is it worth it?✔️ 670W power ➡️ fast heating and stable operation✔️ T12 tips ➡️ precision and durability✔️ Temperature control ➡️ ideal control✔️ Antistatic ESD Safe design ➡️ component safety✔️ HOT AIR with nozzles ➡️ easy SMD mounting/desoldering
SpecificationsPower: 670WNapięcie: 220-240V Working temperature HOT AIR: 100-480°CSoldering iron operating temperature: 200-480°CAirflow: do 168l/minDisplay: LEDOpór between the tip and ground: below 2 OhmESD Safe HousingDiameter of supported HOT AIR nozzles: 22 mmType of tips: T12Soldering iron cable length: 110 cmStation dimensions: 25.3x18.6x12.4 cmMotherboard system based on Samsung componentsAirflow is generated by a turbineCeramic heating element⚠️Attention upon receipt, unscrew the screw marked in red, located on the bottom of the device.
WHAT DO YOU GAIN?Precise digital regulation and a clear display allow you to set the temperature with one movement, and the microprocessor ensures its stability even during significant temperature drops.. The station works quietly thanks to an efficient air turbine – you can solder in the office, workshop, or service center without annoying noise. ESD-Safe construction protects sensitive circuits and ensures safety in professional service. Feel the warmth of precisely directed air, see how the solder melts perfectly where you want it. Hear the hum of HOT AIR, which gives you full control over every solder. Work with passion and professionalism that is visible in every detail.
✅ Key features▶ 2 in 1 – one station, two independent channels: hot air Hot-Air + precision soldering iron in the T12 system. Ideal for SMD, THT, BGA.▶ Total power 670 W – instant heating and power reserve that won't run out even during continuous operation.▶ Wide temperature range 100 – 480 °C on both channels allows soldering delicate circuits and massive connectors.▶ Sleep Mode + Auto Cooling – the electronics switch to sleep mode after inactivity, and the Hot-Air cools the heater itself, extending its lifespan.▶ Auto-Calibration – quick temperature adjustment guarantees accuracy of ±1 °C.▶ Complete set in the box: 3 nozzles 5/7/10 mm, 506A soldering iron with T12-I tip, stand with copper sponge, wet sponge, Hot-Air handle/stand, PL manual – take it out of the box and work.ℹ️ The Yihua 706 II model was produced exclusively for the Techrebal brand. You are sure you are buying the version prepared with demanding users in mind – only from us!
✅ T12 Tips – precision and speed that makes a differenceThanks to T12 technology, the tip heats up instantly (reaches a temperature of 350°C even in 10 seconds) and maintains a stable temperature during intensive work. A heater and a temperature sensor, placed right at the tip, were built into the tip.. Replaceable tips allow for adaptation to different tasks – from precise SMD assemblies to thicker power soldering. This is an indispensable tool for those who expect full control and professional results.✅ Instant tip replacement – no downtimeThe T12 system allows for quick and tool-free tip replacement, enabling immediate adaptation to a specific task. Thanks to the high-temperature resistant silicone holder, you can grip the tip and replace it without waiting for the tip to cool down.. You change the tip in a few seconds and get back to work – without cooling the soldering iron or long waiting.
➡️ Possibility of connecting the 606A soldering iron to C245 tips (not included)The station also offers the possibility to connect the 606A soldering iron, which supports series 245 tips.. This provides additional flexibility for users who want to customize the equipment to their preferences or work with different types of tips – without needing to change the entire station.
✅ The Sleep function in Yihua 706 II – why does it make a difference?Automatic temperature reduction – after 10 minutes of inactivity, the station lowers the tip temperature to ≈ 200°C, stopping oxidation and extending its lifespan.Heater and electronics protection – lower temperature in standby mode relieves the heater and power supply, so the entire system lasts longer.Instant wake-up – just lift the soldering iron; The sensor immediately restores the previously set temperature, so you don't waste a second. Lower energy consumption – Sleep reduces power consumption several times, which you will appreciate during long breaks at work or during a multi-hour service shift. Safer workstation – a cooler tip means a lower risk of accidentally burning wires, mats, or components when the soldering iron is in its stand.
⚙️ Possibility of quick calibration – what does this mean in practice?Menu instead of a screwdriver – you start calibration from the station buttons; There is no need to open the housing or turn the internal potentiometers, as in older models. Two independent channels – you separately correct the temperature of the T12 soldering iron and the Hot-Air, so that both tools work with an accuracy of ± 1°C. Process in a few seconds – just one heating cycle, entering the correction, and saving; after changing the tip or heating element, you return to work almost immediately. Certainty of repeatable results – the microprocessor with PID compensates for thermal inertia, so each subsequent series of solders is just as precise, and delicate circuits have the certainty of the correct temperature. Less service, more work – easy calibration translates into a longer lifespan of the tip and heating element and saves time.
⚡ Advanced temperature control system from SamsungThe advanced, 32-bit Samsung microcontroller monitors the temperature of both channels in real-time (refreshing every 20 ms), instantly compensating for every drop. The effect is heating in a few seconds and stability of ±1 °C, which ensures reliable, repeatable soldering even under heavy load.
Set contains:Soldering Station 706 II 2-in-1 Hot-AirSoldering Iron 506A with T12-I tip (sharp simple)Q208F3 hot air gun hot air nozzles: 5/8/10 mmSoldering iron stand with sponge, copper cleaner, and rosinIntegrated power cordSoldering guide - electronic versionSilicone anti-burn handle for tip replacementPolish user manual
FAQ1. What is the "2-in-1" function?The station combines a Hot-Air rework station and a soldering iron with T12 tips in one housing, so you desolder components with hot air and immediately solder new elements with the tip.2. Can I start working right after unpacking?Yes. In the set, you get the 506A soldering iron with a T12-I tip, a HOT AIR handle, 3 nozzles 5/8/10 mm, a stand with a cleaner and sponge – just connect the station to the mains.3. How much power does the device have and how quickly does it heat up?The total power is 670 W, so the set temperature appears in a few seconds.4. Does the station have a Sleep mode and auto-cooling?Yes. After inactivity, the flask lowers the temperature, and Hot-Air automatically cools the heater, which saves energy and extends the lifespan of the heating elements.5. Can I connect the 606A soldering iron and work with C245 tips?Yes – the station's socket supports the optional YIHUA 606A soldering iron, which allows you to use C245 tips with high thermal capacity.6. How stable is the temperature during operation?The station is controlled by a 32-bit Samsung controller with a PID algorithm, which corrects deviations every 20 ms and maintains stability of ±1 °C.7. Can I calibrate the temperature myself?Yes – the service menu allows for quick adjustment for the soldering iron and Hot-Air separately, without opening the housing.8. Why choose a station with a turbine instead of a compressor?The station with a turbine provides a stable and even flow of hot air, which translates into more precise welding and soldering.. It is quieter, more energy-efficient, and does not require frequent maintenance, unlike compressor models. Ideal for long, comfortable work.
No-delivery refund
