Car Tire Pressure Gauge Stainless Steel Inflation Pressure Gauge High Precision Meter Detector Repair Tools For Mechanical Tires

Description: Needle holds reading until released by pressing the button. Measures in both for PSI (from 0 to 50 for psi) and BAR (0 - 3.5 bar). calibrated in lbs. kpa, kgs or bar. Fitted with 45° angle chuck to allow easy connection to tire valve. To save gas and keep tire wear with proper inflation. For cars, motorcycles, bicycles. Specifications: Color:as the picture Material: Zin Alloy and metal Package size: 10 x 5 x 2.5 cm / 3.93 x 1.96 x 0.98 inch (L x W x H) Test Unit/ Mode: LBS, KBS Gauge range: 0-7kg; 0-100lb/in Precautions: Unit conversion 1kgf / cm2 = 98kpa Normal maintenance of the car, you should measure once a month your tire pressure. How to use: 1.Screw off the cap of tire valve. 2.Screw the copper nipple of the tire gauge into the tire valve and screw down 3.The tire gauge will show your tire pressure 4.If the tire pressure is too low, please inflate the tire; and if the tire pressure is too high, please 5.open the vent valve to lower the tire pressure. 6.After measuring the tire pressure, please screw off the copper nipple, close the vent valve, make the pointer back to zero, and screw down the cap of tire valve. Package Including: 1/2Pcs x Mechanical Tire Pressure Gauge Meter Note: 1. Please note that the photo does not show actual size, please refer to Description for size details. 2. Please allow differences due to manual measurement, thanks. 3. Due to the difference between different monitors, the image may not reflect the actual color of the item. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.