Makita 4mm Cordless 40Vmax with 2 and ST001GRDX Stapler, 2.5Ah, Batteries, Charger, Case,

With improved continuous work capacity and rapid firing speed, it's ideal for demanding continuous tasks such as roofing and board installation. For roofing installation. Approximately 1,000 shots can be fired continuously at high speed. For double-layer board installation. Improved work response provides a feel similar to air-powered models. Reduced time for "winding up" and "driving." Rapid firing speed increased by approximately 15%. *Time to complete firing. (Compared to Makita 18V models) "Drag shot" and "swing shot" are also possible. Excellent rapid-fire capability allows for light and continuous firing. Short-stroke contact arm. Equipped with a microswitch (electronic), allowing for quick firing with a small amount of pressure. Low recoil mechanism. Counterweight system. The weight moves backward in accordance with the shot, canceling out forward and backward vibrations. Reduces recoil and wobble during firing. Protected from dust and rain, with an IP56 dustproof and waterproof rating. *While designed to be resistant to the effects of dust and water, this does not guarantee that it will not malfunction. DC 36V (40Vmax), slide-type Li-ion battery specification. Battery and charger included. Capacity: 100 staples. Applicable nail size: J-wire staples, width 4mm / length 13-25mm. Work capacity per charge (with BL4025 attached, approximate): 6,000 staples. *This is a reference value. Actual work capacity may vary depending on the battery charge level and working conditions. Dimensions: Length 269mm x Width 86mm x Height 216mm. Weight: 2.5kg (including battery).