Beatsonic OnlyOne LED Bulb Siphon Ball95 (Ball 95) Frost G95 (95mm Outer Diameter) 55W Equivalent, Warm White (2700K), E26, 6.0W, 600lm, Frost

*This is a made-to-order item, so please inquire about the delivery time. *Stock availability and estimated delivery dates are not guaranteed. *Due to fluctuations in stock availability, actual delivery may be delayed compared to the estimated delivery date. [Do not use with the following fixtures:] ・Insulated fixtures [SB, SGI, SG type fixtures] ・HID lamp fixtures such as mercury lamps, sodium lamps, and metal halide lamps ・Exit signs and emergency lighting fixtures ・Sealed fixtures with an air volume of 2 liters or less ・Automatic flashing devices such as motion sensors, delayed-off switches, and fixtures with glow-in-the-dark switches ・Lighting fixtures and circuits with remote controls ・Outdoor fixtures or fixtures in locations where water droplets may fall *In addition, depending on the type of fixture used, it may not be usable due to dimensional, thermal, or other conditions. [Precautions for Use] ・The rated lifespan is the time until the total luminous flux (brightness) drops to 70% of the rated value. The rated lifespan is an average value indicating the deterioration of brightness over time and is not a guarantee of the product's lifespan. ・Flickering may occur due to voltage fluctuations. This is not a malfunction of the lamp itself. ・Specifications such as appearance may change without notice. ・Use the lamp within an ambient temperature range of 5 to 40°C. ・Do not use outdoors. ・Due to variations in LED elements, the light color and brightness may differ even for products with the same model number. ・Use with wiring that passes through a surge protection circuit breaker (with a varistor). (High voltage surges from lightning can cause a shortened lifespan) [About Dimming] Smooth dimming can now be achieved with the dimmer alone, without the need for a low-load capacity interface. *There may be slight timing differences in the lighting due to individual product variations. *If the operation is unstable, please change the dimming volume and use it within a range that does not interfere with operation. *Dimming from 0-100% is not guaranteed.