Feature:
1. MEASUREMENT OBJECT: Handheld optical power meter series products are mainly used for continuous optical signal power measurement and optical fiber line connection test
2. BEAUTIFUL AND PRACTICAL: Network cable tester use a single microprocessor to control, possess complete functions. Body shape design meet ergonomic requirements, using advanced cold molding process, beautiful and durable
3. WIDE APPLICATION: Optical power meter is widely used in optical cable construction and maintenance, optical fiber communication, optical cable sensing, optical CAT and other fields
4. VARIOUS FUNCTIONS: The optical power meter has a small shape, automatic switching function, power adjustable, wavelength memory function, automatic identification of working frequency, support lighting, storage and other functions
5. SUPPORT TEST: Fiber power meter support user calibration and SC, FC and ST interfaces; Support linear(nW) and nonlinear index(dB); Support RJ45 test; Support RJ45 hunting; Support ranging
Specification:
Item Type: Optical Power Meter
Wavelength Range: 800 1700
Detector Type: For InGaAs
Measuring Range (dBm): 70 +10
Uncertainty: + 5percent
Standard Wavelength (nm): 850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1625
Display Resolution: Linear Display: 0.1percent , Logarithmic Display: 0.01dBm
Red Light Working Wavelength (nm): 650
Test Range (KM): 15
Frequency Identification (Hz): 0, 270, 1000, 2000
RJ45 Hunting Distance: Approx. 200meter 656.2ft
Ranging Distance: Approx. 40meter 131.2ft
Input Voltage (V): 3 6
Operating Temperature ( celsius ): 10 +60
Storage Temperature ( celsius ): 25 +70
Automatic Shutdown Time (min): 10
Battery Duration (h): more than 48 (single power meter measurement)
Battery (mAh): 1 x Rechargeable lithium battery 1100mAh.
Package List:
1 x Multifunctional Optical Power Meter1 x USB Cable1 x Portable Rope1 x Ceramic Tube1 x User Manual
Note:
1. Please always keep the sensor end clean, so that there is no fat, no pollution, do not use unclean and non standard adapter joints, do not insert the end of the polishing surface is poor, otherwise will damage the sensor end face, so that the test error.2. Stick to an adapter as much as possible.3. Once not in use, immediately cover the dust cap, to protect the end clean, to prevent long term exposure to the air attached dust caused by measurement errors.4. Please insert and remove the connector of the optical adapter carefully to avoid scratches on the port.5. Regularly clean the sensor surface, clean the sensor surface, please use a special cleaning cotton swab gently wipe in the circular direction.
No-delivery refund
