Roof Paint Liquid Roof and Facade Paint – White 12 kg
A high-quality, weather-resistant, aging-resistant, UV-resistant, and chemically resistant dispersion polymer membrane is used for the preservation, renovation, renewal, and sealing of new and old construction surfaces knows: Roof tile (Concrete, ceramic, clay bricks), Sheet metal roof tiles, Sheet metal, Metal, asbestos, Concrete, Bituminous roof covering, Roofing felt, Plaster and many others.
In contrast to conventional products, this is not a liquid emulsion based on simple color with additives.. Our product is an elastic membrane with increased density. It has high sealing properties and a very aesthetic appearance.
The roof color is produced in several shades. The pigments used are resistant to aging and washable.
• Colors according to RAL color palette
• Made in Germany
• Liquid elastic polymer membrane
• High opacity
• Non-flammable
• For indoor and outdoor
• For sealing microcracks
• Highly elastic coating
• Resistant to biological corrosion
Available colors:
Black, Anthracite, Concrete Grey, Stone Grey, White, Brown, Rustic Red, Brick Red
The substrate must be cured, level, smooth, load-bearing, clean, and free from release agents. Remove old, poorly adhering, brittle, and peeling welding membranes, fill holes. Old colors, deposits, moss etc.
from roofs with eternit and sheet metal roofing etc.. remove. Remove rust from corroded surfaces and apply corrosion protection. The surface must be painted with a solution of the roof paint and water in a ratio of 1:3 to be primed.
Welding membranes of all kinds, roof tiles (Concrete, ceramic, clay bricks), Bitumen coatings, Roofing felt, Metal roof tiles, Corrugated sheets, Sheet metal, Metal, Eternit, Concrete, Plaster, Masonry and many others.
Stir the product before processing. Apply the mixed mass in at least two, but preferably three layers using a roller, brush, or syringe. Apply subsequent layers vertically to the layer below.
The last applied layer must be aligned according to the roof pitch. Before applying a new coat, the underlying layers must be completely dry.
• Colors from different batches may show slight variations. The work should be carried out continuously and without interruption.. Only products from a single production batch should be used in an area.
Work on roof corners, roof joints, or the roof base must be planned earlier.. Work on the elements concerned must not be interrupted. This could lead to a color difference at the connection point after the paint has dried.
Subsequent work should only be continued after all applied layers have dried.. The area should be protected from weather influences such as rain, snow, and frost.
Do not add any further substances to the mass. Technical data and application notes apply to temperatures of +23°C and a relative humidity of 50%. The drying time changes under different conditions. Wash tools and dirt off immediately with water.
Thickness of a single layer | 0.8 – 1.2 mm
Drying time of one coat | up to 12 hours*
Number of layers | at least 2 (recommended 3)
Thickness of the finished, dry coating | at least 1.5 mm
Hardening | after 24 hours*
Consumption | approx.. 0.2 ÷ 0.4kg/m²/Layer
Surface and air temperature | +5 ÷ +35ºC
Tools | Brush, Roller, Sprayer
Storage and Transport | minimum +5°C, maximum +30°C
* Time indications refer to normal temperature +23°C and 50% relative humidity. Higher temperatures and higher humidity shorten, lower temperatures and higher humidity lengthen the specified times.
Store in dry and cool rooms, in undamaged and tightly sealed original packaging, at a temperature above 5 º C. Keep protected from frost.
First Aid Measures: In case of contact with eyes, rinse thoroughly with water and consult a doctor. In case of contact with skin, remove clothing and wash skin with soap and water and apply a suitable cream.
If swallowed, rinse mouth immediately with water, do not induce vomiting. Then immediately see a specialist.
Occupational Health and Safety: Wear work clothes, safety glasses, and gloves. Do not eat, drink, or smoke while using the product.
the tools are only to be cleaned mechanically.
cleaning: Tools should be cleaned immediately after use with thinner. Let's take a closer look at it
No-delivery refund
