Car Headlight Headlamp Housing Repair Mount Holder Bracket Tab Clips Kit Left Side for Mercedes E Class W211 S211 2002-2009 A2118201314
Fits for H7 Xenon and Bi Xenon
Package includes all 3 brackets including screws!
Material: Polypropylene (PP) Plastic Same as Original Headlight Material
Replacement parts for OEM:
A2118201314, 2118201314
Fits:
Mercedes Benz:
E Class W211 2002-2009:
E 200, E 220, E 230, E 240, E 270, E 280, E 300, E 320, E 350, E 400, E 420, E 500, E 55 AMG, E 63 AMG all versions;
E Class W211 S211 T Model 2002–2009 Sedan Saloon Estate Combi SW, 350 CGI, E 200 CDi, E 200 NGT, E 250 CDI, E 280 CDi, E 320 4matic, E 320 CDi,
E 350 4matic, E 350 CGI, E 400 CDi, E 420 CDi, E 500, E 500 4matic, E 55 AMG Kompressor, E 63 AMG;
*** How to Weld Our Headlight Plastic Parts?
Our Headlight Parts Material is Polypropylene (PP) Plastic Same as Original Headlight Material.
There are several methods to weld plastic parts. The most common method of plastic welding is Hot Air Welding.
To Weld our parts with Hot Air Welding; You need an electric welding gun and an appropriate welding rod for Polypropylene to complete the repair.
After you clean and identify the plastic, use the heat of the gun to gradually melt and join the plastic together.
Finish the weld by smoothing it out to create a fix that is stronger and cheaper than a new piece of complete system.
More Details and Steps for Welding our parts with Hot Air Welding method:
1. Clean the plastic with soap and warm water to remove debris.
2. Remove paint or Debris on the plastic with a piece of 80-grit sandpaper.
3. Choose a Polypropylene (PP) rod that matches the type of our plastic.
4. Clamp and tape plastic pieces together to hold the joint in place.
5. Preheat the welding gun for at least 2 minutes.
6. Secure the plastic together by tack welding the ends.
7. Insert a welding rod into a speed nozzle on a welding gun.
8. Move the tip of the welding gun slowly over the plastic for a speed weld.
9. Wait at least 5 minutes for the plastic to cool.
10. Sand the welded joint down with 120-grit sandpaper.
11. Finish the plastic with 180 and 320-grit sandpaper.
is warranted that his products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.
Country/Region of Manufacture: Turkey
Ship from: Turkey
Replacement parts for OEM: A2118201314,2118201314
Warranty: 1 Year
No-delivery refund
