Universal Brake System Aluminium Rubber Clutch Brake Bleeder Hose Tube Bleeding Tool Motorcycle Auto Parts Car Accessories

Package contains: 1 * Brake Fluid Bleeder Hose Kit

Specification Material: aluminum alloy+ rubber Size: The total length of the pipe is about 50cm Valve length: 53 mm Inlet pipe inner diameter: 4 mm, outer diameter: 6 mm; length: 150 mm Oil outlet pipe inner diameter: 5 mm, external diameter: 8 mm; length: 350 mm Description This product is a motorcycle brake cleaning tool Drains motorcycle brake fluid quickly and easily Internal valve prevents air from entering the system Easy to use - simple to connect hose and pump Aluminum body resists corrosion from brake fluid and can be easily cleaned

Assembly Attach the two hoses securely to the valve unit as shown

Using the kit - Uncover the bleed nipple of the caliper - Place the end of the hose onto the bleed nipple and secure with hose clip. (alot of cheap bleeders do not come with these) - Check that the valve unit is facing the correct way,the direction of arrow on the the unit should be pointing away from the caliper (again cheaper kits don't come with direction arrow so you end up finding it by trail and error). - Have a container ready to collect the brake fluid that will be flushed out of the system. - When ready,Start Pumping the brake Lever and topping up the fluid until all air has been flushed through and the fluid level is correct in the master cylinder reservoir. - Close Reservoir - Remove the hose from the bleed nipple,clean away any excess fluid and replace cover onto the nipple. - Dispose of any excess brake fluid as per the manufacturer's instructions. - The valve unit and hoses should be taken a part and drained thoroughly,open the valve unit by unscrewing the body