Strong 210 Nail Drill+105L Supply Pedestal Drilling Machine Digital Nail Art Drill Machine 65w Strong

Item type: Electric nail drill and accessories material: plastic Model: Nail Drill Power 210+105L Power: 65W Size: 1 set Strong 210 Nail Drill+105L Supply Pedestal Drilling Machine Digital Nail Art Drill Machine 65w Strong

Packing List:

210 Control Box +105L handpiece Pedal+wrench carbon brush Handpiece Holder Precautions：

① When the handle is used, the handle should not be idling,

and the grinding pin must be installed. ② When installing the grinding head, the rod of the grinding head must be cleaned and cleaned,

and then loaded into the chuck. ③ Don't let water in when you are using the handpiece otherwise the handpiece will be rust.

It must clean the water out and make it dry then continue to use if water go into to handpiece. ④ The use of the foot switch must be turned off the host power,

otherwise it will affect the performance of the host circuit. ⑤ Don’t hit or make it fall down, especially the handle. ⑥ It is strictly forbidden to refuel the bearings Model: Powerful 210 nail drill +105L Item type: Nail drill and accessories Speed: 0~35000rpm Item weight: 2.5kg Collecting chuck: standard 2.35mm Power: 65W Voltage: 220V/50Hz or 110V/60Hz Packing: bubble bag+foam+carton Feature: Nail Manicure Machine Application: Nail Salon We have three chuck optional:

2.35mm/3.0mm/3.175mm. Standard is 2.35mm. If you use is different,

please when you take order must remark.And we use plug, standard is EU plug.

Precautions:

1. When the handle is used, no water can enter and the bearing will rust. If it enters the water, it must

be dismantled on the same day to clean the water, dry it and use it again (to extend the bearing life). 2. When installing the grinding head, the flying dust on the grinding head rod must be wiped clean and

then placed inside the chuck (the service life of the chuck can be extended). 3. The use of the foot switch must be turned off the power of the host,otherwise it will affect the

performance of the host circuit (seriously can cause the motherboard to short circuit or burn). 4. When the handle is used, the handle should not be idling, and the grinding pin must be installed

(to avoid damage to the bearing and the spindle). 5. Do not touch, especially the handle. 6. Do not refuel the bearings