The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.
"1. Induction Wall Lamp (Linkage Model)
Product Name: Sensor Wall Light - Linkage
Light source: LED light
Lighting color temperature: 2700K-3000K warm white light
Lighting delay: 15 seconds
Sensing distance: about 3 meters
Linkage distance: about 10 meters indoors
Battery capacity: 500mAh lithium battery
Rated power: 0.4W
Rated voltage: DC5V 1A
Product material: Sapele wood, plastic, electronic components
Product standard configuration: induction light x 2, magnetic sheet x 2, charging line x 1
Product size: 73x 56x 28mm
Package size: 76x 61x 80mm
2. Instructions for use
(1) Switch control:
Left ON: long light mode;
Right AUTO: induction mode;
Middle OFF: Turn off the night light.
(2) Charging:
In the normal charging state, the indicator light is always on red, and the indicator light turns off when the battery is fully charged.
3. Structure introduction
【 Built-in PIR infrared human body induction + built-in light sensor】 - double induction
Sensing distance: about 0-3 Meter in front of the lamp body
Sensing range: about 120° in front of the lamp body
In the sensing mode, when the surrounding environment is dark and the infrared sensor detects human activity within the sensing range, the light will be automatically triggered. The light is delayed for about 15 seconds, and the light will automatically turn off after people leave.
(Note: 1. The human body is within the sensing range of the lamp body. As long as the person does not move, the lamp body will go out within 15 seconds. 2. Only when the lamp body senses that the environment is very dark and there is no light can the light be turned on, that is, In a very bright environment during the day, the light sensor recognizes that it is a bright environment and will not turn on the light)
【 Intelligent linkage】 This set combination can achieve intelligent linkage, two-way transmission, and light up at the same time,
You can buy multiple sets and install multiple linkages in combination. You don’t need to match them yourself. They are matched after leaving the factory. Turn on the induction mode, and multiple lamp bodies can be automatically linked.
For example:
Place wall lamps in 4 places of the home, ① entrance → ② hallway → ③ bathroom → ④ master bedroom
Lights are installed in 4 places of the house. Whenever you go home, the sensor lights in the porch will light up. At the same time, the sensor lights installed in the corridor, master bedroom and bathroom will also light up synchronously, illuminating the walking route in advance.
Intelligent linkage range: theoretically, the straight-line distance between the two lights is about 10 meters (but affected by different barriers, it will affect the linkage distance of the two lights)
4. Installation Instructions
1. Before installation, make sure that the installation area is free from oil and dust.
2. Tear off the protective glue on the back of the magnetic attracting sheet, paste the magnetic attracting sheet in an appropriate position, and then attach the induction wall lamp to the magnetic attracting sheet. (The built-in magnet in the lamp body can be adsorbed on the surface of ferrous metal)
Product Description
Wood LED Multipurpose Magnetic wall Lamp
-(1) The lamp body is combined with the magnetic base, and it can be turned into a wall lamp by sticking to the wall through the adhesive;
-(2) The bottom of the lamp body has a strong magnetic attraction, which can be magnetically attracted to any ferrous metal surface, and immediately becomes a convenient night lamp.
【 DETACHABLE DESIGN FOR EASY MOUNT】: Built-in magnets on light allow easy mounting . you can even detach your and carry it wherever you go and attach it again to any ferrous metal surface 。So it is portable.
--
Flexible and Easy installation，No hard wiring or drilling required,let the light body absorb on the magnet sheet or ferrous metal surface.
The warm light-emitting units integrated with sapele wood shell effectively relieve pressure and calm your mood. the light effect tends to be soft and warm, which effectively relieves pressure and gives people a comfortable and intimate lighting enjoyment.
【Powerful Long- Lasting】: Built-in 500 mAh rechargeable battery,
In PIR sensing mode, it can last for about 1 month.
In constant light mode, it can last for about 8 hours.
This versatile LED light can be easily charged with the included USB cable and can be easily carried in any emergency.
【Wide Application】: This multifunctional wall lamp can be used as a convenient night lamp, can also be taken off and held or placed on a desktop, It’s a perfect choice to be used in the attic, basement, child’s room, closet, drawer, mailbox, medicine cabinet, storage unit, tool shed, vanity mirror, workstation, and anywhere you need it.
Portable 360° lighting will bring you a good experience!
【 Cool natural wood】（sapele wood） so each light has a different texture and color, which is also natural wood. safe hard and The carefully polished wooden surface is very smooth。
Nice color, fine texture。Perfect choice for home decoration。（Wood grain description: Since it is handmade with natural logs, each one has a unique natural grain, so there will be differences in the grain color.）
It can be used as a good DIY gift accessories to give your friend or family. Perfect decoration for festival, party, house, etc.
Package included
2 x lamp
2x Magnetic sheet
1 x USB Cable
note:
Please allow 1-2cm errors due to manual measurement.
Because of the different display of each computer, the pictures may not reflect the actual color of the item.""
No-delivery refund
