This is a full mode shortwave QRP SSBCW transceiver. Simple, fun and versatile QRP SSB HF transceiver with embedded DSP and SDR functions. EER ClassE driven SSB transmitstage. Ultrasmall size design makes it easy to carry and use. It has a 1602N screen, a builtin microphone and a builtin speaker to ensure superior performance. It can be connected to an automatic key, and can be decoded by CW. Supports a variety of communication modes, including SSB, CW, AM, and Frequency Modulation, as well as DSP filtering and functions, such as AGC, NR, and VOX, to provide a professional communication experience. Its technological sophistication, portability, efficiency, customizability, and ease of use, suitable for a variety of radio enthusiasts.
Features:
SDR Technology & MultiMode Operation: This transceiver incorporates stateoftheart Software Defined Radio (SDR) technology, offering versatile operation modes of USB, LSB, CW, AM, and frequency modulation. It
Features a DSP filter with selectable bandwidths and DSP functions such as AGC, NR, VOX, and ATT, enhancing signal quality and user experience.
Compact & HighEfficiency Design: This transceiver is highly portable with its small size and lightweight aluminum housing. It utilizes an EER Elevel driven SSB stage for efficient power consumption, delivering a maximum 5W PEP SSB output from a 12 V powersupply without the need for a bulky heatsink, making it perfect for site operation.
OpenSource Firmware & Customizability: The device comes with opensource firmware built for the IDE, allowing hobbyists and engineers to experiment, add new functions, and share contributions via GitHub. It supports a communitydriven development environment that enhances the transceiver " s capabilities and ensures continuous improvement. The softwarebased VOX can be used as a quick full invasive (QSK and semiQSK operation) or to assist in running in digital mode (without PTT interface) for RXTX switching, external PTT output with TXPA control delay.
MultiBand Support & Expandability: The transceiver provides performance loss from 20kHz to 99MHz and supports continuous tuning over the 160m to 10m frequency band. It includes an FT8 option connector and supports optional accessories such as an audio cable and Morse key, providing flexibility for different operating scenarios.
UserFriendly & CostEffective: The transceiver is designed for simplicity, reducing installation elements by 50% compared to the initial QCX circuit and eliminating the need for complex transformer windings and alignment procedures. It includes a builtin mic and speaker, and its straightforward setup and operation make it accessible to both amateur radio enthusiasts and seasoned operators.
Specifications:
Name: SDR Transceiver
Material: metal
Radio frequency output: 5W maximum PEP SSB output power at 12 V exit direct current in
Frequency bands: 160m10m
Full mode support: usb, lsb, cw, am, frequency modulation
DSP filter: 4000, 2500, 1700, 500, 200, 100, 50Hz passband
DSP function: automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volumes control, dBmSmeter.
SSB reverse sidebandcarrierwave suppression transmission: better than 45dBc, IMD3 (two tones) 33dBc, reception: better than 50dBc.
Multiband support: continuously adjustable in the 160m10m frequency band (and performance loss from 20kHz to 99MHz).
Open source firmware, built in for IDE; allows experimentation, can add new functions, can share contributions through Github, software complexity: 2000 lines of code.
SSB emitter stage based entirely on digital and software: By controlling the phase of the SI5351 PLL (via the tiny frequency change of I2C over 800kbits) and the amplitude of the PA (via the PWM of PWM) to sample the microphone input and reconstruct the SSB signal. PA key shaping circuit).
Noise floor MDS: 135 dBm at 28MHz (in 200Hz BW)
Frontend selectivity: steep 45dBdecade rolloff +2kHz from tunedfrequency
Blocking dynamic ranges: 20kHz offset 123dB, 2kHz offset 78dB
CW decoder, StraightIambicAB keyer
Package size: 235 * 135 * 83mm 9.25 * 5.31 * 3.27in
Package weight:
Without Morse Key: 420g 0.93lb
With Morse Key: 503g 1.11lb
Packing List (without Morse Key):
1 * SDR Transceiver
1 * Handheld Microphone
OR
Packing List (with Morse Key):
1 * SDR Transceiver
1 * Handheld Microphone
1 * Morse Key
No-delivery refund
