JCD Hot Air Gun DIY Tool Heat Electric Power Tool Mini 300W Soldering Temperature Crafts Blower with Supporting Seat Shrink

# Parameters  ​ ❤ Main Product:  Hot Air Gun  ​ ❤ Plug Type:  EU Plug ​ ❤ Heat Gun Power:  300W  ​ ❤ Achievable Temperature:  200℃   ​ ❤ Rated Voltage:  220V  ​ ❤ Widely Application: DIY Craft Embossing, Shrink Wrapping PVC, Drying Paint, Clay, Rubber Stamp, etc  ​ ​ ​

# About This Item  ​ ❤ Mini Heat Gun: ​Dimensions 225x45mm / 8.86x1.77in (Approx.) 3.28FT Long Cable (Approx.) ​ ❤ Safety Hot Air Gun: ​Mini Craft Heat Gun for Epoxy Resin adopts anti-scalding non-slip handles on the outside, independent switch buttons, and high-quality stainless steel air outlets and stainless steel brackets inside, making the use process safer. ​ ❤ Cooling Holes: ​The temp of the nozzle could reach 200° in seconds. The vent at the rear can reduce the internal high temperature and prolong the service life. ​ ❤ Easy to Use: ​ ​The handing part adopts salient point nonskid designs that cause safe handholding with small energizing!   ​

​ ​ # How to Use the Heat Tool  ​ ​★ Plug in the heat tool. Hold the product as shown on the pict. (Do not touch the hot nozzle.) ​ ​★ Keeping 3-5cm distance from work and about a 45-degree angle to heat until it is completed. (Do not blow the hot air gun directly at 90° to the object.) ​ ​ ​★ Warm Tips:   ​The temp of the nozzle could reach 200° in seconds, please don't use it for more than 10 minutes at one time.  ​If the temperature of the fuselage increases significantly, please close the heat gun and wait for cooling before using it. ​It can not be usedin industrial aspects such as disassembly and welding of small iron sheet components and patch integrated circuits.  ​