Specifications:
Name: Diamond Microdermabrasion Machine
Color: White
Voltage: 220V 50-60Hz
Power: 65W
Why choose our machine?
◆ The vacuum suction of microdermabrasion is stronger than the average level on the market.
◆ The system is stable and the handle is durable
Principle of Diamond Microdermabrasion
● Microdermabrasion is a non-invasive skin remodeling procedure that uses a sterile diamond head to gently remove or polish the top layer of dead skin cells, and then the vacuum traps the dirt or dead skin in the filtration system. It helps improve skin tone, texture and elasticity, and reduces the appearance of age spots, fine lines and pigmentation, etc.
● The vacuum function is used to clean dirt from the pores through the suction tube. It can also increase blood circulation in the skin. It helps improve skin elasticity and can reduce discoloration caused by acne and scars.
● The spray function is perfect for spraying lotion, perfume or essential oil. It can clean, purify, smooth and stimulate the skin.
What can this machine do for you?
① Clean the skin stratum corneum and reduce invasive scars
② Remove blackheads and acne
③ Remove age spots, wrinkles, pigmentation, stretch marks
④ Improve dull skin, make skin smooth, shrink pores, and repair skin cells
⑤ Help absorb natural nutrients
⑥ Skin recovery after active treatment
⑦ Increase the strength of collagen and elastin fibers in the skin
⑦ Reduce redness, scars, wrinkles, inflammation, and acne
⑨ Improve oily/dehydrated skin
How to use?
1. Push in the movable ring of the copper nozzle of the handle and pull out the 8x5 size vacuum hose. Then push in the black plastic ring on the vacuum hose.
2. Drop a drop of cream or lotion on the nozzle of the vacuum hose, push in the movable ring, and insert the vacuum hose to the limit.
3. Insert the cotton swab into the diamond head, and then tighten the diamond head on the handle. Remove the cotton swab after each treatment.
4. Turn on the power switch.
5. Adjust the vacuum intensity through the vacuum regulator according to the reference chart, the intensity is displayed on the vacuum gauge and check for comfort.
6. Use the inclined area of the handle to touch the skin surface. Do it in a slow sliding motion. Do not keep the handle in one position for too long, doing so will cause damage to the skin.
7. Slowly adjust the crystal flow rate from the minimum to the maximum value through the vacuum regulator. For general use, do not set the flow rate to the maximum value unless necessary. This is a better comfortable intensity.
8. Gently stretch the skin with your thumb and fingers and slide the handle over the treatment area 2 to 3 times.
Then cross again in different directions to prevent the streaks in the reference chart. Brush strokes or prevent the streaks in the reference chart. Brush strokes or buffing movements can be used on different parts.
9. After treatment, brush off any remaining dead skin with a soft brush and rinse with a damp sponge or damp cold towel.
10. Allow the skin to dry and then apply the desired skin care products.
11. To clean the diamond head, use a toothbrush or cotton swab with a small amount of alcohol to wipe off the dirty impurities, and then use ultraviolet light or high temperature to sterilize.
Package includes:
1x Diamond Microdermabrasion Machine
1x 6*4 PVC Vacuum Hose
3x Diamond Pen
1x Pen Box and Foam
9x Diamond Head
1x Head Box and Foam
3x O-Ring
1x English Manual
3x Fuse
1x Power Cord
1x Cotton Swab Filter Package
