Infrared Cordless Microphone Set Audio-technica AT-CLM7000TX (2MHz Band) 4-piece

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. Infrared cordless microphone AT-CLM7000TX 4-piece set! Equipped with a high-quality dynamic microphone unit newly developed for this model. A and B channels can be switched. Channel settings are determined by the LED color of the power indicator. Also included is a thin channel identification ring. A lightweight, compact short type microphone. A power-saving type whose infrared output can be switched to three levels (ECO/LO/HI) according to the size of the room in which it is used. Ideal for karaoke business. Can be used continuously for up to 10 hours. (When the microphone output selector switch is ECO). By using A and B in the 2MHz band and A and B in the 3MHz band, up to 4 can be used at the same time. Microphone unit ASSY and grip LOW-ASSY can be quickly replaced. <Specifications> [Microphone AT-CLM7000TX] Model: Dynamic type Directional characteristics: unidirectional Modulation method: FM frequency modulation Carrier frequency: A channel 2.06MHz, B channel 2.56MHz Infrared wavelength: 870±30nm : Dedicated nickel metal hydride rechargeable battery (installed in the main unit) External dimensions: φ56 x 223 mm (head diameter x total length) (when dedicated nickel metal hydride rechargeable battery RB3H is installed) Mass: Approx. 275g ● Accessories: Dedicated nickel metal hydride rechargeable battery RB3UTG (1900mAh), channel identification ring [Receiver AT-CR7000] Number of channels: 2 channels (up to 4 channels when using 2 units) Reception frequency: 1ch (2.06MHz), 2ch (2.56MHz), 3ch (3.20MHz), 4ch (3.70MHz) Output level: Microphone -45dBV (at VOL MAX) Line -30dBV (at VOL MAX) Power supply: DC12V, 500mA (uses the included AC adapter, for use in Japan only) Power consumption: Approx. 4.0W (when 4 light receiving units are connected) External dimensions: H41 x W126 x D106mm Mass: Approx. 260g ● Accessories: AC adapter (AD-SL1205AO), connection cable (RCA pin plug (red and white) - RCA pin plug (red and white), 1.5m) [Charger BC701] Method: Rapid charging Power supply: DC12V, 500mA AC adapter (AD-SL1205AO) Charging output: DC3.5V, 400mA x 2 Power consumption: 6.5W (while charging) Rechargeable battery standard charging time: Approximately 5.5 hours (for our nickel metal hydride rechargeable battery RB3UTG (1900mAh)) *Depends on the remaining charge of the rechargeable battery. External dimensions: H80 x W151 x D70mm Mass: 370g Rechargeable battery operating temperature range: Discharge (when using equipment): -10 to +40℃ Storage: -20 to +40℃ Charging: +5~+40℃ ● Accessories: AC adapter AD-SL1205AO