Ships from Japan
【Sensor】The solar lamp - outdoor waterproof sensor is equipped with 70 LED lights, PIR motion sensor, 120° motion detection angle, and 5-7M detection range. An installation height of 1.5-2.5m is recommended. When a person leaves, it closes automatically. Usage is very simple, just like a clip, install for 1 second.
[Function introduction] ① 3 colors can be switched: white light, neutral white light, warm light. Long press the power button to easily switch colors. ②Adjustable: Adjustable lighting of any color. Short press power button can select 50% brightness and 100% brightness. ③ Timing function: The attached remote control can open the timer function for 3 hours, 5 hours, or 8 hours.
[3 Lighting Modes] 3 modes compatible with remote control. Model 1: The response light will turn on after the person comes, and the brightness will become weaker after the person leaves. Model 2: After the person comes, the guiding light turns on, and when the man leaves, the guiding light turns off. Mode 3: Automatically turn on and hold when it is dark. *It should be noted that Changlian mode consumes a little more than induction mode
[Two Charging Methods] There are two charging methods for the solar sensing light. You can charge the solar charger when there is sunlight. It can be charged through USB during rain, cloudy and sunlight, and USB charging takes about 2 hours. It is recommended to install it in a place with direct sunlight, avoid installing it in an area without sunlight or blocking.
[Outdoor Waterproof] Equipped with a 1500mAh rechargeable battery and a polycrystalline solar panel, it can be quickly charged (6-8 hours) and used for a long time (10-12 hours). In addition, it is IP64 waterproof, heat resistant, and cold resistant, so you can use it even in bad weather such as rain, snow, or fog without damaging the solar sensor light itself.
【Sensor】The solar lamp - outdoor waterproof sensor is equipped with 70 LED lights, PIR motion sensor, 120° motion detection angle, and 5-7M detection range. An installation height of 1.5-2.5m is recommended. When a person leaves, it closes automatically. Usage is very simple, just like a clip, install for 1 second. [Function introduction] ① 3 colors can be switched: white light, neutral white light, warm light. Long press the power button to easily switch colors. ②Adjustable: Adjustable lighting of any color. Short press power button can select 50% brightness and 100% brightness. ③ Timing function: The attached remote control can open the timer function for 3 hours, 5 hours, or 8 hours. [3 Lighting Modes] 3 modes compatible with remote control. Model 1: The response light will turn on after the person comes, and the brightness will become weaker after the person leaves. Model 2: After the person comes, the guiding light turns on, and when the man leaves, the guiding light turns off. Mode 3: Automatically turn on and hold when it is dark. *Changlian mode consumes little more than induction mode
[Two Charging Methods] The solar sensing light has two charging methods. You can charge the solar charger when there is sunlight. It can be charged through USB during rain, cloudy and sunlight, and USB charging takes about 2 hours. It is recommended to install it in a place with direct sunlight, avoid installing it in an area without sunlight or blocking. [Outdoor Waterproof] Equipped with a 1500mAh rechargeable battery and a polycrystalline solar panel, it can be quickly charged (6-8 hours) and used for a long time (10-12 hours). In addition, it is IP64 waterproof, heat resistant, and cold resistant, so you can use it even in bad weather such as rain, snow, or fog without damaging the solar sensor light itself.