Turntable Phono Phonograph Pickup Cartridge Adjustment Ruler Calibration Gauge Lp Stylus Alignment Protractor Tool

Describe: 100 new and high quality Material:pp Color: See picture Size: length 21cm/8.26in, width 4.9cm/1.9in Package Includes:1Pc Phonograph Alignment Protractor Tool 1. Place the protractor on the turntable plate with the hole in the spindle. 2. Move the cartridge/tonearm until the stylus is exactly in the center of the bullseye. . Check that the cartridge is square to the outer set of grid lines. - If not, loosen the cartridge mounting screws and gently twist the cartridge until it forms a square shape. 3. Move the cartridge/tonearm until the stylus is exactly centered on the inner bullseye, pivoting the protractor as necessary. Check that the cartridge is square to the inner set of grid lines. - If not, change the overhang (move the cartridge in or out along the axis) until the cartridge is square. 4. Repeat steps 2 and 3 until the cartridge is square at both points. Tighten the installation and recheck as above. Remove the protractor. Relax and enjoy! feature: High-contrast cartridge alignment protractor improves visibility and eliminates tracking errors. Avoid overshoot distortion to maintain high-quality sound Link to the turntable setup guide with instructions printed directly on the protractor. Works with S-arms and any 1/2" mounted cartridge. Note: 1. Please allow 5-10mm differences due to manual measurement, thanks. 2. The actual color of the product may be slightly different from the picture, and the website is caused by various factors such as the brightness of the monitor and the brightness of the light. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.