Air Regulator for Airbrush Filter Regulator Water Separator Compressor Pressure Adjustment Water Countermeasures [Airbrush Works] AW-020

[Easy to read air gauge] Equipped with a pressure gauge made for airbrushes. The pressure gauge, which is normally upside down, is displayed in the forward direction to make it easier to see. In addition, it is displayed at 0 to 0.4Mpa, which is within the range commonly used for airbrushing, and has high visibility. [Equipped with a drain valve compatible with airbrush compressors] Regular regulators are equipped with a function that automatically drains water when the compressor starts, but small compressors for airbrushes have a drawback that the air does not stop automatically because the air flow is low. The AW-020 is compatible with small compressors for airbrushes, and the automatic drainage function can be switched on and off. By turning it OFF, you can solve the problem of air not stopping at startup. [Ideal moisture control] By installing this unit away from the compressor, the air heated by the compressor can be filtered while it is still cooled. This method allows you to remove most of the moisture in the air, creating an air system with optimal moisture control. (Regular water draining is required) [Air filter with filtration accuracy of 25μm] Equipped with an air filter with filtration accuracy of 25μm to remove fine particles and moisture from the air. [Uses stainless steel taper screw] The connection port is G1/8, which fits common airbrush hoses, and the screw is made of stainless steel and uses a taper screw to improve airtightness. We also conduct strict inspections on all products. In the unlikely event that there is a problem such as an air leak, we offer a 90-day manufacturer's warranty. This is an air regulator AW-020 designed specifically for airbrushes. There are various features specific to airbrushes.