540 S 1 Inch Diaphragm Condenser Microphone Unidirectional LEWITT/LCT

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. [Performance that exceeds human hearing] The threshold of our hearing varies greatly depending on the frequency band, with low sensitivity in low and high frequencies, and highest sensitivity around 2 to 5 kHz. The LCT 540 S uses a unique approach to circuit and capsule design to achieve self-noise below the threshold of human hearing across all frequency bands. [Capture even the most delicate details] The LCT 540 S reveals the details of music. This high-resolution microphone captures even the subtlest nuances of vocals and instruments. Even the faintest whisper voices and delicate expressions will not be buried in the noise floor, and no self-noise will be picked up during the mix. [Multiple uses from vocals to instruments] Featuring cutting-edge circuitry and capsule design, the LCT 540 S has an effective dynamic range of 132dB, allowing you to capture everything from loud volumes to subtle nuances. [3-stage filter, attenuator] There is a status indicator in the center of the front panel. When the LEWITT logo is lit in white, it is normal, and a flashing red light indicates clipping. A low-cut filter is placed on the left side of the panel and can be switched in 3 stages (off/80/160Hz). Similarly, an attenuation button is placed on the right side of the panel, allowing PAD switching in 3 stages (0/-6/-12dB). [Product specifications] Directivity: Cardioid Sensitivity: 41 mV/Pa, -28 dBV/Pa Equivalent noise level: 4 dB (A) Maximum sound pressure SPL (0.5 % THD): 136 dBSPL, 0 dB pre-attenuation S/N ratio: 90 dB (A) Dynamic range: 132 dB (A) Internal impedance: 68 Ω Supply voltage :48 V ± 4 V・Current consumption: 3.6 mA・Mic housing: Zinc die-cast・Connector: 3-pin XLR・Mic dimensions: 158 x 52 x 36 mm・Mic weight: 371g