Moisture Meter Portable Grain Water Content Analyzer Multifunctional LCD Digital Humidity Tester

Feature: 1. Measuring Multiple Grain Moisture: This grain moisture tester can quickly measure the moisture content of 14 varieties of grains such as wheat maize rice peanuts and soybeans. 2. Measuring Range: The measuring range of this grain moisture tester is 7.5 to 44percent (rapeseed, sesame, soybean meal, seed cotton), 10 to 50percent (soybean, peanut), 11 to 50percent (barley, rice, sorghum, watermelon seed), 11 to 55percent (rice, wheat), 11.5 to 50percent (maize, feed). 3. Speaker Design: This grain moisture tester is designed with a speaker on the back of the meter to report measurement readings. 4. Double Probe: This grain moisture tester has a high accuracy double steel probe for easy measurement and durability. 5. LCD Backlit Display: This grain moisture meter has a backlit LCD display for easy reading of measurements in the dark. Specification: Item Type: Moisture Meter Material: ABS Model: MD7822 Material: ABS Measuring Range: 2percent to 30percent Accuracy: + (1percent Rh+0.5) Resolution: 0.5percent Power Supply: 1 x 6F22 9V dry cell (not included) How to Use: 1. Install the batteries and press the button to switch on the instrument. 2. Press the key to select the measurement item of the instrument: The moisture content of the grain to be measured or the temperature at the position of the probe. When measuring the moisture content of the grain, the instrument displays x x. When measuring the moisture content of the grain, the meter displays xx. xpercent , when measuring the temperature at the position of the probe, the meter displays xx. x degrees C. The instrument is in the state of measuring grain water content by default. 3. Grain water content measurement: Make sure the instrument is in the state of displaying grain water content, press the key to select the type of grain to be measured (type represented by the display 1, 2, 3, 4, 1 for wheat 2 for rice, 3 for rice, 4 for corn), insert the probe into the grain to be measured to measure the grain water content, at this time the instrument display is the water content of the grain to be measured. During the measurement process, if the key is pressed and MAXIMUM is displayed on the screen, the instrument enters the maximum value holding mode, press the key again to exit this mode. The display will only be updated if the measured value is greater than the currently displayed value, otherwise it will not be updated. The side button is the reading hold key, press for the first time to select the reading hold function (the display shows the symbol), press again to cancel the function (the display does not show the symbol). 4. Measuring temperature: When you select to measure the temperature at the location of the probe, the instrument can roughly display the temperature of the environment where the probe is located, press at this point to switch between Celsius and Fahrenheit (the instrument displays Celsius by default). 5. When the measurement is completed, press to switch off the instrument and it will enter the hibernation state. 6. Turn the display backlight on off. Open the battery compartment cover on the rear housing and remove the bottom battery. If the switch is set to ON, the backlight will light up when the power is turned on, otherwise the backlight will not light up. Note: 1. This instrument is a high resistance instrument, all parts have excellent insulation, when using and storing, pay attention to humidity and dust prevention, keep dry and clean, so as not to affect the accuracy of the measurement. 2. When using the measuring probe to measure moisture, the grain pressure has a greater impact on the measurement. General sack single layer placed when the most accurate measurement, multi layer placement, the lower grain pressure is large, the index is high, should be based on the experience accumulated in the use of correction, minus the value of the impact of grain pressure, so that the reading is more accurate. The greater the grain moisture, the greater the influence of grain pressure on the measurement, moisture below 13percent , the influence of grain pressure on the measurement is very small. 3. When using the measuring probe to measure grain placed in multiple layers, as long as the influence of grain pressure is subtracted according to one"s accumulated experience, even when measuring samples of high moisture packed grain placed in multiple layers, the test can still be very accurate (within +0.5percent ), but one must calculate the relationship between measurement accuracy and grain pressure, if the grain bag is placed in a single layer and the measuring probe is inserted from the top to the bottom of the measurement, it is also possible to use single layer placement and multiple layer placement The data measured can be compared with the data measured in multiple layers to sum up the experience. Battery Replacement: 1. When the battery voltage is lower than the specified value, a low voltage symbol will appear on the display, indicating that the battery needs to be replaced. 2. Open the battery door and remove the battery. 3. Install the battery correctly in accordance with the markings shown on the battery compartment. 4. If the instrument will not be used for a long period of time, remove the batteries to prevent them from leaking and damaging the instrument. . Package List: 1 x Moisture Meter1 x Probe1 x Instruction Manual Note: Measuring Multiple Grain Moisture: This grain moisture tester can quickly measure the moisture content of 14 varieties of grains such as wheat maize rice peanuts and soybeans. Measuring Range: The measuring range of this grain moisture tester is 7.5 to 44percent (rapeseed, sesame, soybean meal, seed cotton), 10 to 50percent (soybean, peanut), 11 to 50percent (barley, rice, sorghum, watermelon seed), 11 to 55percent (rice, wheat), 11.5 to 50percent (maize, Speaker Design: This grain moisture tester is designed with a speaker on the back of the meter to report measurement readings. Double Probe: This grain moisture tester has a high accuracy double steel probe for easy measurement and durability. LCD Backlit Display: This grain moisture meter has a backlit LCD display for easy reading of measurements in the dark.