Feature:
1. Reversible Design: The pneumatic air drill has CW and CCW switch, and the switching is convenient.
2. Double Bearing Spindle: Double bearing main shaft, and 2 supporting points, has higher concentricity and stronger force.
3. With 3 Jaw Chuck: The 12in pneumatic air drill 3 jaw chuck design, thickened and hardened, can be 360 degree strong bite.
4. Accurate Drilling: Imported movement and fine machining of steel make the clamping and drilling more precise and firm.
5. Wide Clamping Range: The clamping capacity is 1.5?13mm, and it can be drilled on the surface of wood, iron, aluminum, wall, etc.
Specification:
Item Type: Pneumatic Air Drill
Model: KV5113B
Material: Steel
Purpose: Drilling holes on wood, iron, aluminum, walls and other surfaces
Working Pressure: 0.60.8Mpa
Free Speed: 900rpm
Air Inlet Size: 14in
Clamping Capacity: Approx. 1.513mm 0.060.5in
Maximum Drilling Diameter: Approx. 13mm 0.5in.
Package List:
1 x Pneumatic Drill1 x Drill Bit1 x Hanging Ring
Note:
When in use, do not overload or idling at high speed to prevent premature wear of the machine. Lubricating oil must be injected from the inner hole of the connecting pipe 3?4 time. If a secondary impact is found during use, the machine should be shut down for inspection immediately, and disassembly on site (referring to unclean places) is prohibited, and it should be sent to the repair department for inspection in time.Reversible Design: The pneumatic air drill has CW and CCW switch, and the switching is convenient.
Double Bearing Spindle: Double bearing main shaft, and 2 supporting points, has higher concentricity and stronger force.
With 3 Jaw Chuck: The 12in pneumatic air drill 3 jaw chuck design, thickened and hardened, can be 360 degree strong bite.
Accurate Drilling: Imported movement and fine machining of steel make the clamping and drilling more precise and firm.
Wide Clamping Range: The clamping capacity is 1.5?13mm, and it can be drilled on the surface of wood, iron, aluminum, wall, etc.
