Hot Cutting Machine Lace Ribbon High Frequency Multi Electric Scissors

Feature: 1. Heating block, heating in 1 minute, the highest temperature is 2000 celsius . 2. The cutting surface is clean, the cutting speed is fast, and the service life is very long. 3. An additional blade is provided, and the blade is made of high‑quality materials, which is not brittle, small in size and easy to use. 4. A wide range of applications, mainly used in cutting cloth trademarks, elastic bands, lace, cutting edges and bonding trademarks, etc. 5. The blade needs to be tested for heat before production, so there will be used or rust marks on some blades, but it will not affect the use. Please think twice. Specification: Item Type: Hot Cutting MachineDegree of Automation: Manual Drive Form: Electric Total Blade Length: Approx. 8.1cm 3.2in Effective Hot Cutting Width: Approx. 6.5cm 2.6in Blade Statement: The blade needs to be tested for heat before production, so there will be used or rust marks on some blades, but it will not affect the use. Please think twice. Power Switch: Thermostat knob. Package List: 1 x Hot Cutting Machine1 x Blade Note: Please kindly make a note if you need any plug adapter1.When buying the eager cutting machine, buy a few more blades for spare.2. When replacing the blade, be sure to use the blade of the specified specification, otherwise the life of the machine will be affected by the mismatch, and the machine may even be damaged!3. When replacing the blade, if there are foreign objects in the blade contact part or the upper blade screw hole on the machine, please clean it up and then tighten the 4 screws.4. Try not to touching the copper conductors and screw holes at both ends of the blade with your hands, so as not to stick foreign objects to affect the current conduction.5. When replacing the blade, please loosen the screw under the fan counterclockwise, and then remove the 4 fastening screws on the blade. After the blade is replaced, turn the screw clockwise until the blade is straightened to avoid thermal bending of the blade.