Quadcopter Power Hub Power Distribution Board Pdb With Bec 5V And 12V For Fpv

Features: 2oz copper & 4-layers PCB. ESC & Battery solder tabs in pairs Solder Bridges of various voltage for Camera & VTX. DC/DC synchronous buck regulator, Efficiency is up to 95. TVS(Transient Voltage Suppressor) protection for DC/DC chip. 5V & 12V Output LED indicators & Short circuit tolerant Characterization: General: Input voltage range (2S-6S operation):7.2 26VDC Regulated 5V and 12V outputs LED power indicators ( 5V & 12V outputs ) 4 ESC outputs ESC outputs: Continuous current:20A per output Peak current (10 seconds/minute):30A per output BEC 5V output: Designed for RC Receivers, Flight controllers, OSD, and Servos. Voltage:5.0 +/0.1VDC Continuous current:3 Amps Short-circuit tolerant (10 seconds/minute) LED (indicates voltage is in regulation, within 10) BEC 12V output: The battery should be 4S~6S LiPo Standard output designed to power cameras and video transmitters,etc. Voltage:12.0 +/0.2VDC Continuous current:2 Amps (Max.3A 10s/minute) Short-circuit tolerant (10 seconds/minute) LED (indicates voltage is in regulation, within 10) CAM & VTX voltage bridge 3S operation. choose VCC for 12V camera & 12V VTX, VCC=Battery Voltage. 4~6S operation, choose 12 for 12V camera & 12V VTX 3~6S operation, choose 5 for 5V camera Video pass through from the CAM pad to the VTX pad Physical: Dimensions:36 x 36mm Mounting holes 30.5mm square spacing In the package: 1 x Power Distribution Board PDB The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.