Widely Used: Remote switches have a wide range of applications, from simple household remote controls to autonomous control. Wireless remote control switches can control lights, motors, fans, lifting equipment, entrance access, up/down controllers, alarm systems, garage doors, electric doors/locks, windows/blinds, cars, or other devices.
【Easy & Convenient】Wireless control, easy to install. We made the transmitter and receiver work together and tested them before shipping.
【Signal Stability】This RF remote control adopts RF technology, stable signal. The signal of the wireless RF switch can pass through walls, floors and doors, allowing you to steadily control the receiver from anywhere within a reliable distance.
Advantages: This wireless receiver controller features high confidentiality, stable performance, and low power consumption. Interference Resistance: It uses omnidirectional wireless encoding technology, allowing independent control without mutual interference.
[For 12V 4-Channel Wireless Control] The remote switch is a learning switch that can learn various coding remote controls (2262, 1527, etc.) to meet various customer needs. The output/working mode can be changed as desired, and the transmitter can be easily matched. Adjustable working modes, control turn/reverse, on/off, self-lock, jog, and interlock. One or multiple transmitters can control one or multiple receivers simultaneously, without interfering with each other.
About the receiver:
Model Number: AK-RK04S-12
Operating voltage: DC12V
Operating frequency: 315mhz
Static state: 6mA or less
Operating temperature: -40 degrees +80 degrees
Receiver sensitivity: -105dBm or better
Output voltage: DC and AC are optional
Output current: 3A or less
Maximum load current: 20A
Size: 7.2 x 5.2 x 2.6cm
About the operation method: The operation method can be changed by jumpering the pins.
Momentary: No jumper connects any two pins. Relay: Long press -＞ ON; Release -＞ OFF.
Toggle: Jumper connects pin T and pin S. Relay: Press -＞ On; Press the same button again -＞ Off.
Latch: Jumper connects pin L and pin S. Relay: Press -＞ On; Press any other button -＞ Off.
How to learn and clear:
Learning: Press the learning button, the indicator will turn off, then release your finger and press any button on the remote transmitter, the indicator will flash 3 times, which means the learning is successful.
Clearing: Press and hold the learning button for about 8 seconds, the indicator changes from OFF to ON, then press the remote, if the relay does not respond, it means the code has been cleared successfully.
About the transmitter:
Model Number: AK-FS04A
Buttons: 4 buttons
Operating voltage: DC6V
Operating current: 13mAh
Launch distance: 10-50 meters
Encoding: Fixed code/EV1527 code
Note: To replace the remote control, you will need to use a tool to forcefully pry open the back cover of the remote control
Package Contents:
4 x Transmitters
1 x Receiver
