Product Description
✅ This is an aftermarket replacement carburetor for the Honda PW22 S12B P09 motorcycle.
✅ Compatible Vehicles: S12B, P09, PW22, TLR200, TL125, TLR250, CB125S, SL125S
✅ Product Specifications
・ Bolt Hole Spacing: 4.8cm
✅ Intake Diameter: 24mm
・ Air Filter Mount Side (Outer Diameter): 37.6mm (Inner Diameter): 32.8mm
✅ Overall Size
・ Height: Approx. 15.7cm, Width: Approx. 6.8cm
✅ Hose Length
・ Drain Hose: Approx. 31cm
・ Throttle Valve Diameter: φ22 (166C Compatible/Cutaway #2.5)
・ Needle: Equivalent to φ2.50
・ Top Diameter: φ36mm
・ Factory Jet Size: Main Jet #105
・ Slow Jet #38
✅ Rust and corrosion caused by aging are invisible to the naked eye, but they are well advanced.
This may be the cause of reduced torque, unstable idling, and poor fuel economy.
Rust and corrosion caused by aging can cause malfunctions.
This can be used as a replacement if you experience starting problems or a lack of power.
✅ The necessary parts will eventually be discontinued and difficult to obtain, so we recommend stocking up while they are still available.
✅ We recommend stocking/saving them for replacement.
[Product Liability Insurance Covered]
・ We are insured by Product Liability Insurance, so you can purchase with confidence.
・ 1-year warranty (conditions apply)! In the unlikely event that you receive a defective product (even if it has been opened or used), please contact us directly via email from the order screen.
We will provide a refund or exchange after confirming the defect.
[Notes/Not Covered by Warranty]
*Please check before purchasing.
*Incompatible products will not be covered by the warranty if you do not confirm the genuine part number or compatible model number.
*The warranty does not cover malfunctions caused by improper installation or accidents.
*The warranty does not cover damage to this product due to normal wear and tear or aging during use.
*Please note that the warranty does not cover labor or service costs incurred in replacing a defective product.
*While we are insured by Product Liability Insurance (PL), we cannot guarantee any damage to property or personal injury beyond what is covered by the insurance company.
Please be aware of this before purchasing.
Caution (Disclaimer) > Please Read
*Some vehicle modifications may be required.
*Please verify the dimensions and shape of the installation area on your vehicle before purchasing.
*Instruction manual not included.
*If you are unsure about installation, please consult a professional.
*Please note that we do not provide installation support.
✅ This is an aftermarket, genuine-type carburetor for Honda motorcycles PW22 S12B P09.
✅ Compatible Vehicles: S12B, P09, PW22, TLR200, TL125, TLR250, CB125S, SL125S
✅ [Product Specifications] ・ Bolt Hole Spacing: 4.8cm ✅ Intake Diameter: 24mm / Air Filter Mount Side (Outer Diameter) 37.6mm (Inner Diameter) 32.8mm ✅ [Overall Size] Height: Approx. 15.7cm, Width: Approx. 6.8cm
✅ [Hose Length] ・ Drain Hose: Approx. 31cm ・ Throttle Valve Diameter: φ22 (166C Compatible/Cutaway #2.5) ・ Needle: φ2.50 Equivalent ・ Top Diameter: φ36mm ・ Factory Jet Size: Main Jet #105, Slow Jet #38
✅ Rust and corrosion due to aging are not visible to the naked eye and are well advanced. This may be the cause of reduced torque, unstable idling, and poor fuel economy. Rust and corrosion over time can cause breakdowns. These parts can be used as replacements when you experience poor starting or a lack of power. ✅ The necessary parts will eventually be discontinued and difficult to obtain, so we recommend stocking up while you can. ✅ We recommend stocking up/storing them as replacements.
