Genuine Martin Mid-Type Bone Shaped Saddle

Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.

1. KEY FEATURES: - Martin sells another type of genuine orthopedic saddle, but this one is 1mm lower than that (thickness approx. 2.5mm / height approx. 9.5mm at the center, approx. 8mm per string / approx. 9.3mm per 6th string / width approx. 73.7mm) The taller one is almost definitely "too high", but until now,I was selling it based on the idea that "if it's expensive, just cut it down and adjust it" (sorry for being so naive) - However, we realized how difficult it is for the average person to cut horizontally and accurately to about 1mm, so we prepared a lower type (or rather, this may be said to be the standard height). - Although it is only 1mm lower, it takes a certain amount of time to shave 1mm even with a special tool (even if you use the right tool), so it takes time to shave more than 1mm without a special tool, but the biggest problem is that it is almost impossible to cut it horizontally accurately. - Even with this item, if you have a standard to low setting, I think you will need to make some fine adjustments (you still need to cut it down a bit), so if you don't have the special equipment, I don't really recommend the high type unless you have a high string setting. - In addition, when compared to the saddle used for Old Martin, the width is the same, but the thickness is different.There are other precautions for this product, so please see "See more" below.

2. PRODUCT DESCRIPTION: Product Description This product is purchased directly from Martin's head office, but since it is treated as a repair item by Martin, it is a bulk item that will not be packaged with the Martin logo and will be shipped separately.Therefore, even if you are asked to prove that this product is a genuine product, you will not be able to prove it.We don't want to be criticized for such a problem, so we sell it as a product of our shop, not as Martin, so we sell it as if our shop were selling genuine size saddles.Unfortunately, however, there have been many cases where companies that don't even sell guitar parts sell non-genuine, imitation products.Unless you are okay with a similar product, there is no benefit to purchasing a non-genuine similar product at this price.In that case, we recommend a similar product of the same size and bargain price as our original product.Please note that this item is a current guitar saddle for size 18 and above.This has not been tested on low-priced models, so if you are installing it on such a model, we recommend that you measure the size of the saddle you are using.Also, compared to the saddles installed on so-called Old Martins, the Old Martin is thinner (the width is the same).If you adjust the thickness of this item, you can install it on the Old Martin, but please consider purchasing our original shaped saddle for the Old Martin.It is more difficult than the average person might imagine to polish the product evenly to make it thinner (it takes a lot of effort, and the worst thing you can do is end up not being able to polish it evenly and wasting the product...) Caution (Disclaimer) > Please read carefully This is a bulk product.It does not come in a package with a logo etc.*Please note that we cannot be held responsible for any damage caused during installation.

3. PRODUCT DIMENSIONS & WEIGHT: - Weight: 0.02 kg - Dimensions: 7.7 x 4.8 x 0.7 cm

4. SPECIFICATIONS: