Makita TD173DRGXB Rechargeable Impact Driver 18V 6Ah with Two and Case (Black) Batteries, Charger,

---------------------------------------------------------------------- 【JOOM Approved! Sold & Shipped by Trusted Japanese Sellers】

🔹 Operated by Verified Japanese Sellers – Approved by JOOM, our experienced Japanese sellers provide reliable service. 🔹 Direct Shipping from Japan – Carefully packed and promptly shipped straight from Japan. 🔹 Japanese-Standard Quality Control – Strict inspections ensure only high-quality products reach you. 🔹 About Included Manuals – If a manual is included, it will primarily be in Japanese. ---------------------------------------------------------------------- The first in Japan to feature a "full-circumference" ring-shaped LED light, offering optimal balance, a slim all-around head, and comfortable operation. *For domestic cordless impact drivers. As of December 2022, according to Makita research. Significantly improved visibility during work. Approximately 2.5 times brighter (compared to Makita's previous 18V model). Three levels of brightness (strong/medium/weak) can be selected. *For domestic cordless impact drivers. As of December 2022, according to Makita research. Can also be used as a work light. Can be used as a simple light in "light mode." Runs for approximately 1 hour. New trigger switch. Intuitive trigger speed change operation from low to high speeds. Grip closer to the shaft. The gripping hand is closer to the head, making it easier to press the shaft. Reduced cam-out. Battery offset to the rear. Optimized center of gravity position allows for balanced tightening in all directions. Also reduces interference with obstacles. Rear-located operation panel makes it easy to see and use. Mode operation and remaining battery capacity can be checked while holding the switch. The industry's smallest bit runout and double ball bearings are used. Newly designed bit sleeve. Ribs on the edge prevent damage even when the sleeve hits the material. *For domestic cordless impact drivers. Makita research as of December 2022. Tilt angle of approximately 10.5°. Excellent corner-hitting performance reduces cam-out. Comfortable for working near walls. Select the optimal mode for the task. Mode memory function. By pressing two buttons simultaneously, you can register one frequently used mode. Use the button on the handle to switch between the "mode previously used" and the "registered mode." 18V DC, slide-type Li-ion battery. Battery and charger included. Tightening capacity: M4-M8 machine screws, M5-M16 standard bolts, M5-M14 high-strength bolts, and 22-125mm coarse thread. Maximum tightening torque: 180N・m. RPM: Fastest 0-3,600 / Strong 0-3,200 / Medium 0-2,100 / Weak 0-1,100. RPM in Easy Mode: Wood 0-1,800 / Bolts 0-3,600 / Thin wood 0-2,900 / Thick wood 0-3,600. Impacts per minute: Fastest 0-3,800 / Strong 0-3,600 / Medium 0-2,600 / Weak 0-1,100. Easy mode impacts [times/min]: Wood 0-3,800 / Bolt 0-3,800 / Thin wood board: Stops immediately after impact starts / Thick wood board: 0-2,600. Work load per charge (wood screws, lauan φ4.3 x 65mm): Approx. 960 screws Dimensions: Length 111mm x Width 81mm x Height 234mm. Weight: 1.5kg (including battery)