Set of 2 20W LED Fluorescent Light Bulbs, 58cm, Glow-Type, No Base Installation Required, 3000K Warm White, G13 T8 Base, Wide Beam Angle, 270° Beam

[20W straight tube fluorescent lamp] Power consumption: 9W Voltage: AC100V 50/60Hz Base: G13 T8 Color temperature: Incandescent color 3000K Double power supply type LED lamp High brightness: 925LM Beam angle: 270 degrees Dimensions: φ 26 × L580mm Total luminous flux. [LED fluorescent lamp installation method] Dual-powered LED lamps and glow-type lighting bases/ballasts require no installation work. Glow-type lighting bases/ballasts can be used simply by removing the glow bulb. (Rapid-type, inverter-type with glow bulb, electronic lighting bases/ballasts, and inverter-type lighting bases/ballasts without glow bulbs cannot be used.) Direct wiring work is required for the above. [Long-Life Dual-Powered LED Lamp] The LEDs have a lifespan that is approximately 4 to 8 times longer than fluorescent lights, eliminating the need for frequent replacements. LEDs consume significantly less power, cutting your electricity bill by half to one-third! *If your lighting fixture has two lamps, please use two identical lamps. Do not mix these lamps with conventional fluorescent lamps. They emit less heat than standard fluorescent lamps and have no delay in starting. [Environmental Protection] Made of shatter-resistant material for high safety. It emits almost no infrared or ultraviolet rays. LEDs do not contain mercury, so they do not emit harmful substances, making them an eco-friendly lighting fixture. [Notice] *1 - Not compatible with special lighting pedestals. For example, electronic lighting pedestals/ballasts, vanities, and study desks. *2 - Please check the lighting method of your lighting pedestal/ballast before purchasing. If you are unsure, please contact the lighting pedestal manufacturer. *3 - Cannot be used outdoors or in enclosed fixtures. Not recommended for use in high-temperature locations. *4 - We believe that new LED fluorescent lamps are incompatible with older lighting pedestals. If the lighting pedestal is old, malfunctions may occur due to ballast deterioration. In this case, we recommend direct wiring. Please check the lighting pedestal's rating plate before purchasing.